Size of the gap of a magnetic separator to work on the magnetic effect:
The working gap of the so-called magnetic separator is the cylindrical tank spacing. The spacing of the size of the concentrate quality of one of the factors to influence the election. The gap is too small, the drum skin is too close to the distance of the tank, the slurry through not only not smooth handling capacity, and the spacing is too small, regardless of the magnetic size of the particles will be given adequate opportunity to breathe on the drum skin. Mainly caused by the pulp away from too close to the magnetic field, magnetic field strength is high. However, to reduce the tailing grade increase the recovery rate is good. If the spacing is too large, only the strong magnetic particles selected up, the weaker the election does not come up, although the concentrate grade has improved, but the tailings grade also increased, reducing the recovery rate. Therefore, adjustment of the work space is very important. General on-site production work space according to need adjustment in the 35 ~ 60mm range. Working gap can be adjusted through the bracket angle below the gasket to change the size of the gap.Ceramic Sand Kiln
China molino de bolas de cerámica
Sand-making Production Line
Maquinaria de minería
Plantas Móviles de Trituración
The working gap of the so-called magnetic separator is the cylindrical tank spacing. The spacing of the size of the concentrate quality of one of the factors to influence the election. The gap is too small, the drum skin is too close to the distance of the tank, the slurry through not only not smooth handling capacity, and the spacing is too small, regardless of the magnetic size of the particles will be given adequate opportunity to breathe on the drum skin. Mainly caused by the pulp away from too close to the magnetic field, magnetic field strength is high. However, to reduce the tailing grade increase the recovery rate is good. If the spacing is too large, only the strong magnetic particles selected up, the weaker the election does not come up, although the concentrate grade has improved, but the tailings grade also increased, reducing the recovery rate. Therefore, adjustment of the work space is very important. General on-site production work space according to need adjustment in the 35 ~ 60mm range. Working gap can be adjusted through the bracket angle below the gasket to change the size of the gap.Ceramic Sand Kiln
China molino de bolas de cerámica
Sand-making Production Line
Maquinaria de minería
Plantas Móviles de Trituración
