PP single layer and multi layers sheet extrusion line is used to process granular plastic (PP, PS) into sheet material through the heat process, extruding and rolling for the thermoforming machine to use.
Model | UINT | JBD-90 | JBD-120 | JBD-75/100 |
Screw diameter | mm | 90 | 120 | 75/100 |
Screw L/D ratio | 33:1 | 33:1 | 33:1 | |
Host motor power | kw | 55 | 75 | 45/75 |
Heater capacity | kw | 32 | 40 | 28/38 |
Temperature control | Zone | 5 | 6 | 5/6 |
Extrusion capacity | kg/h | 130-150 | 180-250 | 200-260 |
Die orifice width | mm | 1000/1400 | ||
Production width | mm | 750/1150 | ||
Production thickness | mm | 0.5-5 | ||
Heater capacity | kw | 20+15/28+15 | ||
Temperature control | Zone | 5/7 | ||
Wheel width | mm | 1000/1400 | ||
Wheel diameter | mm | 310/370/400 | ||
Transmission motor power | kw | 3/5.5 | ||
Linear speed | m/min | 0.6-15/2-20 | ||
Heater capacity | kw | 18*3/21*3 | ||
Temperature contol | Zone | 3 | ||
Motor power | kw | 2.2*3 | ||
Transmission motor power | kw | 3/3 | ||
Linear speed | m/min | 0.6-15/2-20 |