Telecom Parts

RJ45 Face Plate
Installation distance of the hole:60mm
Use For: RJ45 cat5e / cat6 ethernet cable
High quality new PC flame retardant raw materials.

ST Bare Fiber Optic Adaptor, with high quality of matallic housing and ceramic sleeves. Insertion Loss less than 0.2dB.

SC Bare Fiber Optic Adaptor, with high quality of matallic housing and ceramic sleeves. Insertion Loss less than 0.2dB.

FC Bare Fiber Optic Adaptor, with high quality of matallic housing and ceramic sleeves. Insertion Loss less than 0.2dB.

1 pair STB box 95*45*50mm is made in high quality of material of ABS,the material of subrack made in Stainless steel.

UDW2 connector
Max insulation O.D. 4.4mm(0.175")
For solid copper 1.3-0.9mm(16-19AWG) cable

UY connector
This connector should be used to electrically connector one wire end and insulate the connection.

UY2 connector
This connector should be used to electrically connector two wires end and insulate the connection.

URconnector
This connector should be used to electrically connector three wires end and insulate the connection.

UBconnector
This connector should be used to electrically connector two wires end and insulate the connection.

11 ways | used as to install the LSA modules | mounted onto the back plate in the Main Distribution Frame (MDF) or Cross Connection Cabinet (CCC) or t

It is used throughout the distribution level, in the main distribution frame (MDF), in the cross connection cabinet (CCC) and in the dp boxes

Connection 10 pair TLM1006,the contact pin is Phosphor Bronze with silver-plated and module color is grey. The material is used by PBT or ABS.

Connection 10 pair TLM1009,the contact pin is Phosphor Bronze with silver-plated and module color is white. The material is used by PBT or ABS.

Connection 10 pair TLM1004L,the contact pin is Phosphor Bronze with silver-plated and module color is grey. The material is used by PBT or ABS.

Subracks TLM1212 can be ordered as per request, in order to mount LSA PLUS modules. The material is used in high quality of Stainless steel.

RJ11 ADSL Modem Splitter
1. ADSL splitter in line with 2 ports,
2. Line/ phone/ modem=three connect ports
3. High quality with high performance

27dBm Dual Wide Band Mobile Repeater, Best Mobile Phone Booster Repeater Amplifier Manufacturer, gain 80dB coverage 2000m2 cell phone signal booster

10 pair disconnection module
On cable side with an additional screw termin al.
Material: PBT/ ABS / PC
For clicking onto back-mounting frame

Disconnection module 2/8xabs ( for 2M Bps Circuits)
with d =12mm cable support
Material: PBT/ ABS / PC
For clicking onto back-mounting frame