Others

Iron Based Nano crystalline Ribbon is composed of Fe, Si, B, Nb, and Cu etc.
Iron based amorphous alloy including Cu and Nb element.

a) Least expensive material compared to AlNiCo magnets and rare earth magnets
b) High intrinsic coercive force
c) Available in simple shapes only du

Specifications
Sintered Permanent Small Disc Ferrite Magnet
1.Low cost
2.High corrosion resistance
3.High working temperature

The size of Neodymium Magnet Disc are produced according to customers' requirements,and manufactured according to ISO9001 quality system.

1)High Curie temperature
2)High resistivity (10 ohm-cm)
3)Low core loss

The characteristics of our ferrite magnets have being fit for the standard of Y30BH, Y35 which are equal to C7, C8A, C8B, C9~C12

Ferrite magnets,sintered ferrite magnets,segment Ferrite magnets.The magnetic property and size can be according to clients' requirement.

1.Material:SrO or BaO and Fe2O3
2.Magnetic properties: High corrosion resistance, High working temperature, High coercive force and low cost.

Grade:
China Standard:Y10T,Y20,Y25,Y30,Y30BH,Y35
USA Standard:C1,C5,C8,C11
this ferrite magnet used in Electric motors

Custom manufactured ferrite, ferrite bead, ferrite core, ferrite magnet, bonded ferrite magnets, ferrite material, dry pressing ferrite magnet .

As important parts of magnetic materials, hard ferrite materials play a heavyrole in electronic industry, electronic information industry

magnets ferrite block shaped
1.Material:Ferrite Magnet
2.Size: 84x64x17mm or according to your requirement
3.Grade:Y25.Y30,Y30BH
4.Coating:No need

Iron Based Nano crystalline Ribbon is composed of Fe, Si, B, Nb, and Cu etc.
Iron based amorphous alloy including Cu and Nb element.

Specifications
radial magnetization ferrite ring speaker magnet
1) high quality ferrite materials
2) customized size & accurate tolerance

The injection magnet is strong but can be magnetized radially or multi poles.

Permanent neodymium bar magnets
1. Customized size available
2. High gauss can be achieved
3. Fixing holes can be deisgned as per your needs

Ceramic magnets are the most economical yet still very strong permanent magnets.
USA standard grades:C1, C5, C7, C8,C9,C10,C11.

Ceramic (Ferrite) Magnets are produced by calcining a mixture of iron oxide and strontium carbonate to form a metallic oxide

MATERIAL: Ferrite Magnets;
CERTIFICATION: TS16949 ; ISO14001:2004
Category: Block with hole Magnets
Size :60*30.10-D15*10mm
Grade:Y10-Y3

important parts of magnetic materials
hard ferrite materials play a heavyrole in electronic industry, electronic information industry