Valves

Size: 2" ~ 24"(DN50 ~ DN600)
Rating: ANSI 150lb ~ 1500lb
Body Materials: Carbon Steel, Stainless Steel, Alloy Steel, Duplex Steel

These closed center valves have a 90° lever movement. In neutral position, the inlet is closed to pressure and outlets are closed to exhaust.

1.600wog Brass Ball Valve
2.CSA Brass Gas Ball Valve
3.Brass Ball Valves Thread & Sweat
4.600psi Brass Shut off Valve
5.Bronze Ball Valve for Wate

Power consumption AC: 3.5VA DC : 3.0W
Scope of voltage: AC: ±15% DC: ±10%
Protection :IP65 ( DIN40050 )
Activating time:0.05 sec and below

pneumatic bellows valve is in single seat pneumatic (sleeve) based control valve with bellows for sealing, the guide structure.

Size: 2" ~ 40" (DN50 ~ DN1000)
Rating: PN10,16,ANSI 150lb
Body Materials: Cast iron,Ductile
Disc: Ducitle iron,Stainless Steel
Seat: EPDM,PTFE

equipments to meet quality of ISO9001 procedures to meet world standard and internationalized specification..

The SY Can Be Used Individually or Manifold Mounted
Long Life (Exceeding 50 Million Cycles)
Response Time 10 mSec or Less
Clean Aesthetic Design

It is particularly applicable to the engineering pipeline for gas separation by pressure swing adsorption such as hydrogen, carbon dioxide, oxygen.

1.600wog Brass Ball Valve
2.CSA Brass Gas Ball Valve
3.Brass Ball Valves Thread & Sweat
4.600psi Brass Shut off Valve
5.Bronze Ball Valve for Wate

A pneumatic solenoid valve is a switch for routing air to any pneumatic device, usually an actuator, allowing a relatively small signal to control

The SY Can Be Used Individually or Manifold Mounted
Long Life (Exceeding 50 Million Cycles)
Response Time 10 mSec or Less
Clean Aesthetic Design

high pressure angle pressure regulating valve adopts lens type valve structure, the valve seat is easy to replace, good sealing performance.

1.600wog Brass Ball Valve
2.CSA Brass Gas Ball Valve
3.Brass Ball Valves Thread & Sweat
4.600psi Brass Shut off Valve
5.Bronze Ball Valve for Wate

The mainly products are Hand-control Valve,Pneumatic Control Valve,pneumatic
accessories,one-way throttles,direction valves,and so on

Fluids: Compressed Air
Differential pressure (PS) 0,35 - 8,5 bar [1 bar = 100kPa]
Ambient temperature range -40/-20 to +85°C (TPE/CR)

bellows seal single seat control valve is a top guide structure regulating valve, the valve has the advantages of compact structure.

1.600wog Brass Ball Valve
2.CSA Brass Gas Ball Valve
3.Brass Ball Valves Thread & Sweat
4.600psi Brass Shut off Valve
5.Bronze Ball Valve for Wate

Power consumption AC: 3.5VA DC : 3.0W
Scope of voltage: AC: ±15% DC: ±10%
Protection :IP65 ( DIN40050 )
Activating time:0.05 sec and below

pneumatic angle valve control valve spool is rectangular in shape, not only guide structure, the valve flow path is simple, easy cleaning.