Valves

1. Operating Method: Plunger Pilot
2. Applicable Fluid: Air, Water, Oil(bellow 50CST)
3. Pressure Range: 0-0.8MPa
4. Temperature: -5-185 celsius

2V series solenoid valve can use with air, water and oil. Usually, they are used to control Solenoid Valve for large flow. Also, they can be use

High temperature solenoid valve TEFLON seals
FKM ,PTFE
Stainless steel alloy

it is direct action type two position two way solenoid valve. It adopts the diaphragm seal structure, with zero differential pressure staring function

1.SM solenoid valve
2.Direct acting
3.Long lifespan with low power consumption at press
4.Applied to compressed air, water system

Brass filter
code:HC5004
Size:1/2"--4"
Certificate:ISO9001
Material:brass body

1.Pilot diaphragm drive, normally open.
2.Orifice: 20mm
3.Can be operated directly without pressure.
4.Standard voltage : 24VDC,110VAC, 220VAC

brass valve normally closed IP65 air oil water solenoid valve
a:General Service for Air/Inert Gas, Water, Lt. Oil service at moderate temperatures.

it is direct action type two position two way solenoid valve. It adopts the diaphragm seal structure, with zero differential pressure staring function

1.Pilot diaphragm drive, normally open.
2.Orifice: 25mm
3.Din43650A connector coil.
4.Standard voltage : 24VDC,110VAC, 220VAC

1.CE certification solenoid valve
2.Direct acting
3.Long lifespan with low power consumption at press
4.Applied to compressed air, water system

Normally Open Solenoid Valve; 2 way brass water air gas IP65 Normally Open Solenoid Valve Semi-direct lift type
1) NO solenoid valve.
2) IP65

2W160-15(1/2") Solenoid Valve;

1.Standard voltage : 24VDC,110VAC, 220VAC
2.Valve body material is brass.
3.Can be operated directly without pressure.

This series solenoid valve imports Japan basic type with low-consumption of power, good resistance to abrasion, quick action and long service life.

1.CE certification solenoid valve
2.Direct acting
3.Long lifespan with low power consumption at press
4.Applied to compressed air, water system

Pneumatic solenoid valve
1) IP54 coil made by ourself.
2)CE, ROHS,ISO9001-2008.
3) forged brass
4) for water, air, vacuum, weak acid and alkal

it's one type of direct acting two way solenoid valves with working pressure of 0-1.0mpa. A good replacement for SMC solenoid valves,..

1.SM solenoid valve
2.Direct acting
3.Long lifespan with low power consumption at press
4.Applied to compressed air, water system

Pilot diaphragm drive, normally closed.
Valve body material is brass.
Can be operated directly without pressure.