Valves

for general chemical and industrial services
Related pneumatic and electric unit can be installed

short length structure can save original materialinstallation spacesupport pipe intension effectively.

pneumatic Femal Thread 2-pcs Ball Valve, for General Chemical and Industrial Services Temperature range: -20 to +150 degrees Celsius pressure: 150psi

Stainless Steel butterfly valve tri clamped end,welded end,threaded end, with viton,silicon,epdm gasket
SS304 and SS316, size 1/2" to 12"

Size: 1/2"~4"
Pressure Rating:PN16
Body Material: CF8, CF8M, CF3, CF3M,

THINKTANK focused on manufacturing control valve, shut off valve, butterfly valve, knife gate valve, ball valve, globe control valve,

Check valves serve to prevent the backflow of medium flow in the piping system, widely applied in the field of potable water

Standard:
Design standard conform to: MSS SP-67, API609, EN593
Connection flange conform to: DIN PN10/16/25, ANSI B16.1,

Ball valve sealing surface is usually in the state with the spherical closed, it is not easy to be eroded by the media, easy to operate, simple

- professional factory with many years experience.
- various kinds of materials are available.
- good quality with competitive prices.

• Solder End
• Bronze body stainless steel screen and solid tapped retainer cap
• Maximum Pressure: 400psi (27.6 bar) WOG, 125psi (8.6 bar)

Features
Anti-Static Devices For Ball- Stem- Body
Blow-out Proof Stem
Pressure Balance Hole in Ball Slot
Built in ISO 5211 Bracket Mount for Easy

Stainless Steel Solenoid Valve for Water Air
2 way SUS 304 Water Weak Acid and Alkali Solenoid Valve

Trunnion mounted Ball Valve has following advantages:fire-proof and antistatic design , No-direction limit for installing ,wide usage, reasonable pric

3-PC STAINLESS STEEL BALL VALVE,STAINLESS STEEL VALVE,BALL VALVE,CAST STEEL VALVE,FULL PORT BALL VALVE,VALVE FOR WATER OR OIL OR STEAM

Stainless Steel 1PC Ball Valve
DN: 6-100mm, Reduce Port
Material:SUS304/316
Pressure:1000PSI / PN64
Medium:water,oil,gas...

three way Stainless Steel Ball Valve
Design Standard: ANSI B 16.34
Testing Standard: API598
For general chemical and industrial service

1),Size:1/4"-------4"
2),Material:WCB,304,316(CF8,CF8M)
3),3pc ball valve,stainless steel ball valve,thread ball valve,three piece ball valve

Medium: Water, Air,Oil,Gas
Temperature:-5 to 80 degree
Pressure: 0 to 10 Bar
Material: Brass
Seal: NBR ...

stainless steel solenoid valve for water,air and so on
1)stainless steel316
2)DN 2 to 5mm
3)2/2 way series
4)direct acting series