Valves

pulse jet valve ,size:3/4" ,orifice:20mm ,NBR or Viton diaphragm ,voltage:24V DC,110V AC,220V AC ,working pressure :3-8Bar,Ambient temp:-5℃~55℃

1.100% tested
2.Good quality and cheap price
3.OEM Service Offered

High-end 5/2 way pneumatic control valve.The valve material (the leading part, O- ring, solenoid coils) using imported materials in japan.

NAMUR valves(4V series) are widely used for pneumatic actuators,high quality,cost and space saving are characteristics of MECHIN NAMUR valves

TPMS TR525 Tire valve:
1.Feature: Harder,Lighter,more Fasion than Traditional Ones
2.Material:Special Aluminium Alloy

1.Ambient Temperature: -5~55℃
2.Relatively Humidity: <85%
3.Working Medium: Clean Air
4.VoItage: AC110V/AC220V/DC24V

Type: LPR-N Testing Valve
Materiall:Alloy
Service:H2S, CO2
Standard:NACE MR0175
Operate:Full-opening, annulus press

A pneumatic solenoid valve is a switch for routing air to any pneumatic device, usually an actuator, allowing a relatively small signal

Power consumption AC: 3.5VA DC : 3.0W
Scope of voltage: AC: ±15% DC: ±10%
Protection :IP65 ( DIN40050 )
Activating time:0.05 sec and below

Product description
(1)Position:two-positon three-way
(2)O-ring:material high-end NBR
(3)Life:30,000,000 times life

We provide hand valves of good quality and competitive price....
Model Number: Hand Lever Valve Pneumatic Hand Lever Valve 4H Series

ASCO Dust collector pulse valve
Goyen Right Angle Pulse Valve
ASCO Submerged Electromagnetic Pulse Valve

koganei Solenoid valve high quality Large flow, large body, low power, long life

pulse jet valve ,size:3" ,orifice:76mm ,NBR or Viton diaphragm ,voltage:24V DC,110V AC,220V AC ,working pressure :3-8Bar,Ambient temp:-5℃~55℃,

5 way 3 way Mechanical control gas valve 1/4 inch pneumatic have valve
Aluminum Alloy;
lock;
rotary;
wheel ,spring .

This series solenoid valve are the same as ASCO type.Before and after the end cover material and seals imported materials.

MECHIN Tiger Valve,adopt FESTO tiger classic solenoid valve technology,sleeve structure,NASS coil and armatures to guarantee tiger valve high quality

A pneumatic solenoid valve is a switch for routing air to any pneumatic device, usually an actuator, allowing a relatively small signal to control

Application:Drill stem testing
Service: H2S, CO2
Condition: New
Standard:NACE MR0175
Working condition: High pressure High temperature...

1.Effective Sectional Atea: 30mm2(cv+1.68) 18mm2(cv+1.00)
2.Port Size: G1/4" G3/8" G1/2" G1/8" G1/4"
3.Working-pressure Range: 0~0.8MPa