Valves

1),Size:1/4"-------4"
2),Material:WCB,304,316(CF8,CF8M)
3),3pc ball valve,stainless steel ball valve,thread ball valve,three piece ball valve

Standards: flange connection dimension: GB/T1724.1-98, ANSI 150/250/300 lbs, BS PN10, JIS 10K are also available upon request.

Medium: Water, Air,Oil,Gas
Temperature:-5 to 80 degree
Pressure: 0 to 10 Bar
Material: Brass
Seal: NBR ...

stainless steel solenoid valve for water,air and so on
1)stainless steel316
2)DN 2 to 5mm
3)2/2 way series
4)direct acting series

The opening and closing parts of the globe valve are plug-shaped discs with flat or conical seals on the top of the seal.

150LB flanged gate valve
Working temperature-29~425℃ WCB -40~500℃SS
Material: Carbon steel, Forged steel, SS304 SS316 SS316L, etc.
Specifications

1) Investment casting.
2) Competitive Prices
3) Prompt Delivery
4) Body and Filter Material:SS316, SS304, SS201, SS202

Stainless Steel butterfly valve tri clamped end,welded end,threaded end, with viton,silicon,epdm gasket
SS304 and SS316, size 1/2" to 12"

1.Large Flux, low Resistance, No Water-hammer Y-type Shape Enlarged The Flowing Section, which Could Raise The Flux By 30% And Make Flow More Smooth

1.stainless steel y type strainer
2.1/4"-4":DN8-DN100
3.1.6-6.4MPA/800psi
4.WCB 201 304(CF8) 316(CF8M)
5.Butt Weld

Timing mode and countdown mode MINI auto drain motorized ball valve for air compressor & water treatment works
size : G 1/2"-1"
Open close : 3-5S

Rated stroke deviation of KHPM type electric pressure regulating valve, a straight stroke electric actuator and low flow resistance .

Check valves serve to prevent the backflow of medium flow in the piping system, widely applied in the field of potable water

3 way ball valve/three way ball valve
PN:1.6,2.5,4.0,6.4MPa
PT:2.4,3.8,6.0,9.6MPa
Size: DN15-DN100(1/2"-4")

Size: 1/2"~4"
Pressure Rating:PN16
Body Material: CF8, CF8M, CF3, CF3M,

Ball valve sealing surface is usually in the state with the spherical closed, it is not easy to be eroded by the media, easy to operate, simple

Our difference with others
1) All bolts & Nuts are SS304
2) All Piston are hard anodizing
3) Packing:Foam + small carton box to protect goods

• FIP X FIP
• Stainless Steel Filter
• Easy removal of sieve for cleaning
• Maximum 300PSI working pressure (21Bar)

Notes:
@ Cast Iron body. Pressure Up to 13kg/Cm2 temp, 428 F
@ Cast Steel body, Pressure Up to 40kg/cm2 Temp, 400c
@ Bronze bo

1. Pressure: 3000/6000psi
2. Male thread or Female thread
3. Port size:1/4",1/2", 3/4",1"
4. Material: SS304, SS316, brass