Valves

Stroke adjustment at main spool, optional
Stroke adjustment and/or end position indicator, optional
Mechanical or inductive limit switch

Directional control valves with removable coil
type:rexroth type
Pressure:High Pressure
Temperature of Media:Normal Temperature

pneumatic thin fat through engine valve dual oriented structure, equipped with multi spring actuator. Has the advantages of compact structure.

Hydro-electric pressure switches type HED 1 are piston pressure switches.The switching pressure is set by rotating the adjustment screw.

2 way water valve normally close stainless steel SS304 2 inch VITON NPT BSP thread
2.5-50mm orifice;
2 way;
NBR ,VITON;
ss304.

pneumatic control valve is driven by compressed air source to the cylinder as the actuator,, and with the help of electrical valve positioner.

-Valves used to control the start, stop and direction of a fluid flow
-Electro-hydraulic operation (WEH), hydraulic operation (WH)

Electric coil 9v 12v 24v 110v 220v 100v 230v solenoid for valve plug wire lead type connector
3V series;
4V series;
pluse type;
water valve type.

pneumatic control valve is driven by compressed air source to the cylinder as the actuator,, and with the help of electrical valve positioner.

proportional electro-hydraulic control P-Q valve
1.Maximum pressure: 31.5 MPa
2.medium: oil
3.control: hydraulic
4.Maximum flow:250L/min(DN25

lectric pressure regulating valve, a straight stroke electric actuator and low flow resistance through the regulating valve.

5 way 3 way Mechanical control gas valve 1/4 inch pneumatic have valve
Aluminum Alloy;
lock;
rotary;
wheel ,spring .

Innovative packing structure design
The top guided structure design
Detachable structure design
Standard modular design

AJ type accumulator control valve group
1.Nominal diameter:20,25,32,40 mm
2.Pressure regulating range: 6.3;16;25;31.5MPa

electric valve is composed of three 3810L series electric actuators .

NG10 Cetop 5 Series Standard Manifold Block (A05P/D05P/A05S/D05S)
Model NO.: A05P/D05P/A05S/D05S
working pressure:35MPa

pneumatic membrane lining PTFE valve, ZJHPF pneumatic PTFE membrane lining a single seat control valve is a kind of anti corrosion through single seat

Electro-Hydraulic Proportional Relief & Flow Control Valve
Max Operational Pressure:25 Mpa ( 255 kgf/cm2 )
Max Flows:125 l/m

Rated stroke deviation of KHPM type electric pressure regulating valve, a straight stroke electric actuator and low flow resistance .

4 Way 3 Position Hydraulic Solenoid Directional Valves
Voltage:DC24V
type:rexroth type
Coil Light:Din
Max working pressure:210bar