Valves

2PCS Stainless Steel Ball valve with ISO5211 mounting padBall valve sealing surface is usually in the state with the spherical closed, it is not eas

Brass Compression Ball Valve,ball valve,ball valve with aluminum handle,ball valve with chrome plated,Brass ball valve,water valve,plumbing valve,val

1.Anti-fire safe design.Anti-static device
2.Free leakage of body Sealed construction
3.Double block&bleed.
4.Extension stem.

Nomical Pressure:1.6MPa
Working Medium:Water,Non-corrosive liquid
Working Temperature:-20℃≤t≤110℃
Pipe thread to ISO228

FLOAT VALVE REGULATES FLUID LEVEL BY USING A FLOAT TO DRIVE AN INLET VALVE SO THAT A HIGHER FLUID LEVEL WILL FORCE THE VALVE CLOSED WHILE A LOWER FLUI

• Solder End
• Bronze body stainless steel screen and solid tapped retainer cap
• Maximum Pressure: 400psi (27.6 bar) WOG, 125psi (8.6 bar)

Body Materials: Carbon steel, Stainless steel
Trim: A105+ENP, 13Cr, F304, F316
Bore: Reduce bore
Operation: Lever, Gear

Ball valve sealing surface is usually in the state with the spherical closed, it is not easy to be eroded by the media, easy to operate, simple

valve with steel handle,ball valve with chrome plated,Brass ball valve,water valve,plumbing valve,valve for pipe,full-port valve,compression valve

1.Anti-fire safe design.Anti-static device
2.Free leakage of body Sealed construction
3.Double block&bleed.
4.Extension stem.

BRASS BODY WITH LONG STEEL HANDLE WITH FEMALE AND MALE THREAD.

• Drain Port Allows Draining of the Non-Pressure Side of the Valve When Closed
• Threaded ends comply with ANSI B1.20.1

Ball valve sealing surface is usually in the state with the spherical closed, it is not easy to be eroded by the media, easy to operate, simple

Body Materials: Ni-Al-Bronze(B148 C95800)
Trim: Ni-Al-Bronze(B148 C95800)
Operation: Lever

ball valve,ball valve with aluminum handle,ball valve with chrome plated,Brass ball valve,water valve,plumbing valve,valve for pipe,full port valve

1.Anti-fire safe design.Anti-static device
2.Free leakage of body Sealed construction
3.Double block&bleed.
4.Extension stem.

Ball valves are the three different types of rotary valves used in industrial plants. They are widely used in fluid-handling systems for flow control.

• Threaded - Forged Brass Body - Cast Iron Handle
• 125 PSI WOG to 100°F, Maximun Temperature 180°F
• Threaded ends comply with ANSI B16.18

Body Materials: Carbon Steel
Trim: Carbon Steel
Operation: Lever, Gear, Electric, Pneumatic, Hydraulic

ball valve,ball valve with steel handle,ball valve with chrome plated,Brass ball valve,water valve,plumbing valve,valve for pipe,full port valve