Valves

brass magnetic valve for steam,hot water
normally closed constructions
1)connection: flange
2)material:brass,stainless
3) max 180 degree c.

Pressure Rating: 1.6- 2.5Mpa
Specification: DN15-50
Material: Steel WCB
Standard flanges: DIN ANSI JIS JB79

high pressure solenoid valve:
1) nass coil imported from Germany
2) max 25mm for 1"
3) water, gas, low viscosity NC

Piston type solenoid valve connection size: 3/8"-2",orifice size :17mm-50mm,working pressure 1-15bar, valve body :Brass, seal:PTFE,temp:-5-180℃

Pressure Rating: 1.6- 2.5Mpa
Specification: DN15-50
Material: Steel WCB
Standard flanges: DIN ANSI JIS JB79

Temperature resistant
special coil
frequent moves
long tested
high temperature ,hot water,HTF

Steam Piston pilot operated pneumatic diesel solenoid valve
1) Steam,water, hot water, air, oil (below 20cst)
2) SS304 and SS316 body
3) IP65

DA21M-303A is Car Solenoid Valve for Antifreeze fluid ,Which Designed as Pilot-operated working type ,Brass body and HNBR Seal ,

Working Medium :Air,Water,Steam
Motion Pattern :Guide Type

2 inch 24v Steam water brass Solenoid valve
Media: Steam, hot water, air, oil (below 20cst)
Sealing material: PTFE
coil protection: IP54/IP65

TS16949 Certified solenoid valve ZX-03 Which deisgned connection port is Male M10X1 ,Can install directly ,Body material 6061-T6

2 way SUS 304 Flange Pilot operated IP54 steam solenoid Valve
-- Media: Steam,water, hot water, air, oil (below 20cst)
Normally Closed

Pressure Rating: 1.6- 2.5Mpa
Specification: DN15-50
Material: Steel WCB
Standard flanges: DIN ANSI JIS JB79

2/2 Direct Action type Car Solenoid Valve for Ammonia Gas ,Working pressure range between 0.5-5bar with EPDM Seal and SS304 Body ,TS16949 Certified pr

High pressure nass coil solenoid valve
1)HIGH PRESSURE,
STAINLESS STEEL BODY
Temperature:-5~130
Pressure:0~100 bar(DN1~3MM), 6~160bar(DN10~25MM)

1. The media temperature may reach to 180℃.
2. The Operating pressure may reach to 5Mpa.
3. It is for various fluid media such as water,gas.

High pressure water mini nass coil solenoid valve 1 inch
1)HIGH PRESSURE,
2)STAINLESS STEEL BODY
3)Temperature: -5~130
4)Sealing material: PTFE

automotive Valve for compressed air with HNBR seal ,normally closed ,1-25BAR ,DC18-32V

it is for hot water, high temperature medium,
1) Bodymaterial: brass, SS304
2) Operatingtype: normally closed/ normally open
3) Pressure: 0-25bar

Carbamide valve for SCR system which is widely used on diesel engine