Valves

1. ISO 4401 Standard pattern subplates
2. Four main ports with NBR or FPM seals for different working position
3. With or without indicator lamp

Control vSingle seated control valve, double seated valve ,sleeve control valve with Linear actuator (travel (10-100mm)

1). Can't fire, not pollute the environment. Affected by temperature changes little .
2). Weight 28KG .

1. Wet-pin solenoid design for lower operation sound
2. High working pressure and back pressure
3. Reliable spool switching

Customer first, forge ahead.
Safe, convenient, models, more widely used.

1.Filter: 40u
2.Working pressure: 0.05-3.5Mpa
3.Ensured Pressure Resistance: 4Mpa
4.Working Medium: Air

1.Five slots in valve housing for high pressure and long service life
2.Coil with terminal and conduit connected box
3. Standard interface

Water control valves points diaphragm piston type and two kinds, the main component has a main valve and its attached catheter, guide valve, needle,

-Type: Gas Oxygen Cylinder Valve QF-8 ;
-Working Pressure: 15 Mpa ;
-DN(mm):Φ4
-Outlet thread: W21.8X1/14;

1). Leakage blocking, internal leakage is easy to control, the use of safe.
2). Then the computer, the price is cheap.
3). simple system.

1. Single heavy-duty solenoid operated for high pressure performance
2. Directional spool, poppet direct operated
3. With or without indicator

Water control valves points diaphragm piston type and two kinds, the main component has a main valve and its attached catheter, guide valve, needle,

Thomson Precision Linear Actuators T Series T13-B-5010

1. Strong solenoids for heavy duty
2. Single solenoid actuation, voltage changeable
3. DIN 24340 Pattern standard subplate mounting

1).Big variable control piston return spring strong, fast response.
2).100% Nominal torque shaft drive structure

1). Motion pattern: Inner Guide type.
2). Wiring Form: Lead wire type or connector type.

1. Sleeve with hexagon and protective cap or rotary knob option
2. Normally closed/open for A or B type
3. Installation for manifolds

1).Weight 90KG.
2).good insulation.
3).waterproof, moisture proof.
4).anti-vibration and corrosion resistance.

1. High strength of casting iron as valve housing
2. Hand wheel with adjustment element
3. Five pressure stages option

1.All the key parts of the valves hardened for long service life
2.N90 materials as the O-ring for good sealing on manifolds