cartridge mechanical seals

Cartridge Mechanical Seals:
Temperature: -40℃~220℃
Pressure: 2.5Mpa
Speed: 20m/s

successfully used in many different applications at Clean water,sewage water and other moderately corrosive fluids.REPLACE AES CONVERTOR II CARTRIDE

Materials:
Stationary Ring: CA/SIC/TC
Seal Face: SIC/TC
Sedondary Ring: NBR/VITON/PTFE
Spring & Other Parts: 304/316

High qulity AES CDSA Double Cartridge Seals.The standard seal unit is 316 Stainless Steel with Carbon and Silicon Carbide faces and Viton O' rings.

Suit Hilge series pumps ,include Hygiana, Euro Hygia,Maxana,Dura,Sipla,Contra,and Durietta.

material :
staitonary ring :sic/TC
Rotary ring :carbon/sic/tc
secondary seal:NBR/EPDN/VITON
Spring and metal parts:starinless steel

A) Cartridge mechanical seals, convenient installation, no need to adjust;
B) The spring is outside installation, so it can be proted

Mechanical Seal H74 Replace Burgmann H74 for Industrial Pump and Water Pump . multiple spring equivalent to BURGMANN H74 seals.

material :
staitonary ring :sic/TC
Rotary ring :carbon/sic/tc
secondary seal:NBR/EPDN/VITON
Spring and metal parts:starinless steel

single cartridge seal mechanical seal AES CURC.We also have other cartridge seals, simlar as Johncrane cartridge seal, AES cartridge seal, Burgamnn...

Mechanical seals for Gorman-Rupp Pumps.double-floating, self-aligning, oil lubricated mechanical cartridge seal with stationary and rotating face .

Combined Materials:
Stationary Ring (Ceramic/SiC/TC)
Rotary Ring (Carbon/SiC/TC)
Secondary Seal (NBR/EPDM/Viton)
Spring and Metal Part (Steel)

Single Spring rubber diaphragm seal with rubber boot mounted seat to DIN-EN 12756 seat housings
, Equivalent to John crane type 21/AES P04/AES P04T

this kind of mechanical seals parts is very popular in this mechanical seals line .

size: 25mm
fit for the pump code 4630
T05VC PLUG-In seal
FLYGT 4630 PUMP REPLACEMENT SEAL

Equivalent to Burgmann Cartex-SN
Single cartridge mechanical seal
Multiple spring,balanced,most popular type. CARTEX ANSI CARTRDIGE TYPE SEALS

mechanical seals` Operating Conditions:
Temperature:-20oC~380oC
Pressure: ≤2.0Mpa
Speed: ≤ 23m/Sec

Type SEW is a single-cartridge seal for use with clean fluids and lubricants.
Equivalent with John Crane Safematic Seal, Sh-Sc-SEW For ABS PUMPS

Type 4610 cartridge seal,compact, single-cartridge seal,meets key industry pump standards, and is designed to permit use in rotating shaft equipment

Upper and lower 25 mm shaft size seals for use together, but available separately, to suit various A.B.S.® submersible pumps

size: 60mm
for the pump code 3202.4670.4680.5100
Flygt Plug-in Seals feature two independent mechanical seals ounted in a single ready to install

Cartridge mechanical seals is very populary.
we can supplier as the drawing.

This seal equivalent to burgmann type M7N series mechanical seal. M7N for Burgmann Water Pump Spare Parts Pump Seal Mechanical Seal

Conical spring, 'o'-ring mounted, DIN standard seal and DIN long seat with drive slot, Suitable for a large variety of general and duty applications

Mechanical seals for Donjoy Lobe Pump . and Centrifugal Pumps , S-KS/KS/BS/etx
and Self-priming Pump , CIP ,CIP+, and Blener/Mix pumps

mechanical seals` Operating Conditions is
Temperature: -40℃~220℃
Pressure: 25bar
Speed: 16m/s

burgmann H7N SEALS. BURGMANN H76,BURGMANN H75 SEALS.
For industrial pump, blower pump, diving pump,circulating pump mechanical seal

Replacement the burgmann M2N seals. CARBON Rotory face. G9 stationary seat.

Temperature: -40℃~220℃
Pressure: 2.5Mpa
Speed: 20m/s

Mechanical Seal M74 Replace Burgmann M74 50mm for Industrial Pump and Water Pump . multiple spring equivalent to BURGMANN M74.