one touch tube fittings

Material：plastic,brass
Fluid Types Air (No other type of gas or liquid)
Working Pressure Range 0~150PSI 0~9.9KgF/cm2(0~990KPa)

One touch tube fittings,one side is thread and another side is directly soft pipe tubing,it's easy to use and replace

1. Own factory 2. Accept OEM 3. large in stock 4. each design in series

*Fluid Type: Air(No other gases or liquids)
*Working Pressure: 0-150Psi
*Negative pressure: -29.5 in Hg
*Working temperature: 32 -140° F

*Fluid Type: Air(No other gases or liquids)
*Working Pressure: 0-150Psi
*Negative pressure: -29.5 in Hg
*Working temperature: 32 -140° F

Material：plastic

Material：plastic

Material：plastic

Material：plastic,brass

Productivity:50000 /month;Min. Order:25 pcs;Packing:Carton;Transportation:By sea or by air;DeliveryDate:7~45days;PaymentType:T/T, L/C;Trademark:SPE/O

Material：plastic

Standard seal material:NBR Temperature Range:-20℃ to +80℃Rated Pressure(Bar)

Productivity:50000 /month;Min. Order:25 pcs;Packing:Carton;Transportation:By sea or by air;DeliveryDate:7~45days;PaymentType:T/T, L/C;Trademark:SPE/O

Manual tube fittings
to connect the thread and socket
Good quality,low price
Original manufacturer of Pneumatic tube fittings

*Fluid Type: Air(No other gases or liquids)
*Working Pressure: 0-150Psi
*Negative pressure: -29.5 in Hg
*Working temperature: 32 -140° F

Use to the pipe in the same direction from female thread. The thread to tube push-in fitting allows simple connections between hose/thread.

*Fluid Type: Air(No other gases or liquids)
*Working Pressure: 0-150Psi
*Negative pressure: -29.5 in Hg
*Working temperature: 32 -140° F

Productivity:50000 /month;Min. Order:25 pcs;Packing:Carton;Transportation:By sea or by air;DeliveryDate:7~45days;PaymentType:T/T, L/C;Trademark:SPE/O

We have various kinds of plastic pneumatic fittings, brass fitting and SS fitting with both inch and metric measurement system.

External tightening with a flat or socket wrench, internal adjustmeent with an Allen wrench.In line connection of tubing to a female threaded port.

1. Own factory 2. Accept OEM 3. large in stock 4. each design in series

In line connection of tubing to a male threaded port. External tightening with a flat wrench.

We have various kinds of platic pneumatic fittings, brass fittings and SS fittings with both inch and metric measurement system.

Our company products, hydraulic coils, hydraulic solenoid coil, hydraulic valve coil are produced according to the ISO9001:2000 standards.

It is mainly used for air line quick installation, pneumatic tool joint parts.Corresponding to its purpose, has a rich variety of body material .

pneumatic brass one touch fittings for tube (JSC), Low Price,Highly Qualty, Good Service. Good Packing,

*One touch type connection tool for air pressure piping.
*Various uses depending on the user's environment.

In line connection of tubing to a male threaded port. External tightening with a flat wrench or socket wrench.

One-Touch Tube Fittings

PD Touch fittings
1.One touch fittings pneumatic fittings, push in fittings
2.100% tested