hydraulic flow valve

1).Convenience:Engineer available to service machinery overseas.
2).We guarantee quality product.
3).We guarantee competitive price.

1. RE Flow control valve
2. Sizes from 1/8 to 1"
3. Good quality, cometitive price,fast delivery
4.Pressure:0.03 to 0.95Mpa
5.Material:aluminum

1.Controlling flow in actuator lines
2. Obtain required speed of the actuator in both directions
3. Sandwich plate standard of ISO, NFPA, ANSI

Body material: carbon steel
Ball material: SS304
Stem material: SS301
Ball seals: PTFE+20%C
Spring washer: 60Si2MnA...

1.Port Size: G1/8" G1/4" G3/8" G1/2"
2.Working Medium: Air
3.Working-pressure Range: 0~0.95MPa

1. Precision adjustable for flow control
2. Threads and subplate assembly option
3. Mineral oil as medium

Body material: carbon steel
Ball material: SS304
Stem material: SS301
Ball seals: PTFE+20%C
Spring washer: 60Si2MnA...

1.Operating Temperature Rang: -5~+100℃
2.Material of Body: Brass
3.Material of Oil Seal: PTFE
4.Operation Fluid Viscosity: 50 CST(Below)

brass ball valve
ball valve
ball valve handle
best quality valve

1. throttle check valve;
2. working pressure up to 400bar;
3. accurate control;
4. burst pressure 0.5bar;
5. heat treated needle.

Body: brass
Normal close or normal open
Seals: NBR,EPDM or VITON

Air non-return valve check valve for air conditioner 1 inch pneumatic One way valve
Aluminum Alloy;
female ;
high quality .

The valve limits the flow rate in the pipeline to a preset rate, regardless of upstream pressure variations.

motorized control valve
1.On/off /3-piont/proportional
2.1/2''-2''
3.Voltage: 24VAC/DC
4. For HVAC, water treatment

1). competitive price.
2). The terminal box is featured by reliable sealing and easy connection.
3). Hydraulic Oil, Viscosity: 10--350mm2/s.

5 way air control pneumatic valve 4v series M5 1/8 1/4 3/8 1/2 thread BSP NPT
4a110;
5 port ;

1. Easy adjustment for flow control
2. Little internal leakage to ensure the performance
3. 100% tested for each item, guarantee quality

The valve is used at outlet pipe of pump, with its open & close speed adjustable, and also used at high building for reducing water hammer

1. Meter-in or meter out throttling adjustment control
2. With two throttle check valves
3. ISO, NFPA, ANSI Sandwich plate mounting

Silver pneumatic air flow speed control valve low pressure check valve
1.KLA ;
2,air control;
3.Aluminum Alloy

5 Port 2 position pneumatic air flow control hand pull valve Manual valve
4H210-08;
5 port;
0~0.8Mpa.

1. One way throttle valve with sensitive adjustment
2. Max flow rate reaching 30L/Min.
3. Lower internal leakage

Air compressor check valve pneumatic flow control valve 1/8 1/4 3/8 1/2 BSP NPT
1.ASC-08 ;
2,air control;
3.Aluminum Alloy

1. Internally or externally pilot operated valve
2. Hydraulic type actuation
3. Adjustable switching time

Flow control valves 1/8" 1/4" air check valve 3/8" 1/2" black hand valve
Aluminum Alloy;
female ;
high quality .

3 way pneumatic solenoid air flow control valve with LED right plug
3v210-08;
12v 24v 220v 110v;

1. Lower inner leakage
2. Six pressure adjustment range
3. Standard pressure presetting 175bar

Large water flange solenoid valve cast iron 4 inch 5 inch 6 inch 8 inch
230V AC
wire type

2/2 way high quality irrigation solenoid valve / water flow control valve
plastic;
NBR.

2 way or 3 way 4-20ma proportional flow control valve for HVAC system
Product size : G (bsp) 1/2"-2"
Open / close time : 35-45S