variable pump energy-saving injection molding machine
it best adapted to thin-walled products processing,it required to response agility, speed stability, and minor
differences,it significant change in the instability of traditional open-loop control easy to change,can not control
feedback correction,product uniformity bad caused by a long time does not guarantee the quality,not the same
thickness,transparency of the inequality,flash,starving or excess material,silver grain
constant pump molding machine
research and develop different screws according to different injection condition,suitable for the progressive demand and greatly improve the injection quality
1. Adopting double-cylinder balance injection system realizing stepless adjustment, with multilevel injection, pressure maintaining and anti-dribbling action, high injection pressure, and fast speed.
2. Low-speed big torque hydraulic motors drive screws directly, stepless speed changing is achieved.
3. Adopting five-pivot point oblique double-elbow hydraulic machinery clamping devices, for energy saving and stable movement.
4. Adopting computer control, proportional electrohydraulic drive, auto-alarm, fail safe, high degree of automation.
5. The machine has "Manual" mode, "Semi-automatic" mode and "Automatic" mode. "Automatic" mode includes "Electric Eye" automatic and "Time" automatic for users to choose.
| FL100 | ||||
| INJECTION UNIT | ||||
| A | B | C | ||
| Screw dimeeter | mm | 32 | 35 | 38 |
| Screw L:D | L/D | 24.1 | 22 | 20.3 |
| Shot volume | cm3 | 133.7 | 160 | 188.6 |
| Injection pressure | Mpa | 232.1 | 194 | 164.6 |
| Screw rotate speed | rpm | 210 | ||
| Shot weight PS | g | 122 | 146 | 172 |
| Shot weight PS | oz | 4.303 | 5.15 | 6.067 |
| CLAMPING UNIT | ||||
| Clamp force | KN | 1000 | ||
| Toggle stroke | mm | 320 | ||
| Space betweentie bars | mm | 365×360 | ||
| Max.mould height | mm | 360 | ||
| Min. mould height | mm | 120 | ||
| Ejector stroke | mm | 100 | ||
| Ejector force | KN | 38 | ||
| Ejector number | pc | 4+1 | ||
| OTHERS | ||||
| Die positioning hole | mm | 125 | ||
| Pump pressure | Mpa | 16 | ||
| Pump motor pOwer | KW | 9 | ||
| Heating power | KW | 10 | ||
| Oil tank capacity | L | 158 | ||
| Machine weight | T | 2.8 | ||
| Machine demensions(L×W×H) | m | 4.34×1.24×1.9 | ||
Injection molding machine, injection molding machine or injection machine. It is the main forming equipment plastic products, thermoplastic or thermosetting plastics using plastic molding into various shapes. Divided into vertical, horizontal, all electric. The function of heating plastic injection, high voltage is applied to the molten plastic, so that the injection and full of mold cavity
Welcome to my company contact information
Any question about this machine ,contact us please,sincere service for you!!!
Welcome to my company contact information
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
