Horizontal Injection Moulding Machine
Double guide column bearing, cylinder balance injection device, injection screw forward the process to ensure the balance of power evenly.
High quality alloy nitride or chrome screws, nitrided barrel, corrosion and fatigue, significantly increase service life.
Nozzle on the fine-tuning device.
High torque hydraulic motor driven screw pre-plastic devices.
Multi-stage injection speed, pressure, unit set.
Different characteristics of engineering plastics, to provide special screw barrel, to ensure building quality products.
| FL450 | ||||
| INJECTION UNIT | ||||
| A | B | C | ||
| Screw dimeeter | mm | 75 | 80 | 85 |
| Screw L:D | L/D | 23.5 | 22 | 20.7 |
| Shot volume | cm3 | 1727.1 | 1965 | 2218.3 |
| Injection pressure | Mpa | 155.9 | 137 | 121.4 |
| Screw rotate speed | rpm | 194 | ||
| Shot weight PS | g | 1572 | 1788 | 2019 |
| Shot weight PS | oz | 55.451 | 63.07 | 71.218 |
| CLAMPING UNIT | ||||
| Clamp force | KN | 4500 | ||
| Toggle stroke | mm | 740 | ||
| Space betweentie bars | mm | 765×765 | ||
| Max.mould height | mm | 780 | ||
| Min. mould height | mm | 280 | ||
| Ejector stroke | mm | 170 | ||
| Ejector force | KN | 90 | ||
| Ejector number | pc | 12+1 | ||
| OTHERS | ||||
| Die positioning hole | mm | 200 | ||
| Pump pressure | Mpa | 16 | ||
| Pump motor pOwer | KW | 45 | ||
| Heating power | KW | 33.6 | ||
| Oil tank capacity | L | 720 | ||
| Machine weight | T | 18 | ||
| Machine demensions(L×W×H) | m | 7.55×1.9×2.53 | ||
Welcome to my company contact information
