NICKEL 270 WIRE MESH / SCREEN
Nickel-270 Wire mesh/screen is a commercially pure nickel. When cold-worked through reductions in area of 10 to 94%, it displays slight recovery hardening after annealing in the temperature range 200° to 300°C. The 30-minute recrystallization temperatures are in the range 290 to 400°C and are inversely proportional to the degree of prior cold work. The time dependence of recrystallization in specimens deformed 94% yields an apparent activation energy of about 40 kcal/mole, which is in better agreement with that for zone-refined nickel than with that for substantially less pure nickel.
To ensure the quality of our product, we can produce the product with raw materials from the international suppliers. Every batch of product can be tracked to the original raw material supplier. We co-operate with international suppliers like Allvac(ATI), Bohler, Carpenter, Dunkirk, Gloria, OttoKumpu, SMC, ThyssenKrupp VDM, Valbruna, etc.
Mesh: 0.5-250mesh, Thickness:0.05mm above
Chemistry Data (%) :
Nickel | C | Cu | Fe | Co | Cr | Mn | Ti |
Balance | 0.09 max | 0.001 max | 0.005 max | 0.001 min | 0.001 max | 0.001 | 0.005 max |
Physical Properties of Nickel 270 Wire Mesh/ Screen:
Density | Specific Gravity | Curie Temp | Melting Point | Electrical Resistivity | Thermal Conductivity | Specific Heat | Thermal Expansion |
0.321 lb/cu in | 8.89 | 680°F (360°C) | 2624°F (1440°C) | 7.5 Micro-ohm-cm | 0.86 W/cm.°C | 0.108 Cal/g-°C | 7.2ppm/°F (212°F) |
MechanicalProperties of Nickel 270 Wire Mesh / Screen:
Tensile Strength | Yield Strength | Elongation | Modules of Elasticity | |||
65ksi | 44MPa | 20ksi | 138MPa | 40 % | 30Mpsi | 207kMPa |
Applications:
Resistance thermometers, electronic cathodes or anodes, fluorescent light components.
Machinability:
May be machined by conventional means although the alloy is soft and "gummy". High-speed-steel tooling with very positive rake angle is recommended
Expanded Mesh |
Perforated Mesh |
Twill Weave mesh |
Dutch Twill Weave Cloth |
Dutch Weave Mesh |
Reverse Dutch Weave Cloth |
5-heddle Weave Mesh |
Cross twill weave |
Plain Weaving Mesh |
Product Description: The product produced by us is of good quality and is priced reasonably.
Competitive price: The labour cost and cost on procuring the raw materials is low and hence the manufacturing cost is reasonable. We provide high facility in short producing cycle and have strong adaptive capacity in producing variation of products.
High quality assured: The work done by us has a good command of advanced technological process in the respect of smelting, rolling, drawing and heat treatment up to finished products. The chemical analysis department, the physical testing department and the quality control department all operate an all-round monitoring of our products from raw materials to final products.
Packing Process & Transportation:
Packaging: Seal up, with plastic inside and wooden case or carton outside; or according to the customer's requirements.
Transportation: By air: Beijing International Airport OR By sea: Trianjin Seaport
We provide our customers with excellent services. If you want more detailed information of this product or related problems, please contact with us, we will reply as soon as possible (general in 24 hours).
.jpg)
.jpg)
