INCOLOY ALLOY MA956 WIRE MESH
Incoloy alloy MA956 Wire Mesh first developed as an aerospace superalloy and now used in a range of industrial applications, combines excellent strength and fabricability with outstanding resistance to prolonged exposure up to 1300°C (2400°F).
Incoloy alloy MA956 Wire Mesh has exceptional properties resulting from the mechanical alloying process by which it is made; a process which allows a fine distribution of yttrium oxide particles to be incorporated into a highly corrosion-resistant Fe-Cr-Al alloy.
Incoloy alloy MA956 Wire Mesh has excellent oxidation resistance up to 1300°C (2400°F) and significant creep strength up to its unusually high melting point of 1482°C (2700°F). Thicker sections may be used up to 1370°C (2500°F). Typical industrial applications include hearth rollers, radiant tubes, furnace muffles, fluidized bed retorts, heat treatment baskets, mesh belts, heat shields, burner nozzles, sensor tubes for thermowells and combustion chamber components for diesel engines. The forming and machining characteristics are similar to those of conventional high chromium ferritic steels and Fe-Cr-Al alloys.
Incoloy alloy MA956 Wire Mesh first developed as an aerospace superalloy and now used in a range of industrial applications, combines excellent strength and fabricability with outstanding resistance to prolonged exposure up to 1300°C (2400°F).
Incoloy alloy MA956 Wire Mesh has exceptional properties resulting from the mechanical alloying process by which it is made; a process which allows a fine distribution of yttrium oxide particles to be incorporated into a highly corrosion-resistant Fe-Cr-Al alloy.
Incoloy alloy MA956 Wire Mesh has excellent oxidation resistance up to 1300°C (2400°F) and significant creep strength up to its unusually high melting point of 1482°C (2700°F). Thicker sections may be used up to 1370°C (2500°F). Typical industrial applications include hearth rollers, radiant tubes, furnace muffles, fluidized bed retorts, heat treatment baskets, mesh belts, heat shields, burner nozzles, sensor tubes for thermowells and combustion chamber components for diesel engines. The forming and machining characteristics are similar to those of conventional high chromium ferritic steels and Fe-Cr-Al alloys.
Limiting Chemical Composition, wt.% of Incoloy MA956 Wire Mesh:
Iron ...............................................................................Balance*
Chromium ...................................................................18.5-21.5
Aluminum ....................................................................3.75-5.75
Titanium...........................................................................0.2-0.6
Carbon..........................................................................0.1 max.
Yttrium oxide...................................................................0.3-0.7
Copper........................................................................0.15 max.
Manganese .................................................................0.30 max.
Cobalt ...........................................................................0.3 max.
Nickel..........................................................................0.50 max.
Phosphorus ................................................................0.02 max
Physical Properties of Incoloy MA956 Wire Mesh:
Density, lb/in3 | 0.262 |
g/cm3 | 7.25 |
Melting Point, (Approximate Solidus), °F | 2700 |
°C | 1480 |
Specific Heat, Btu/lb•°F | 0.112 |
J/kg•°C | 469 |
Coefficient of Expansion, 70-200°F10-6 in/in•°F | 6.25 |
20-100°C, μm/m•°C | 11.3 |
Thermal Conductivity, Btu•in/ft2•h•°F | 76 |
W/m•°C | 10.9 |
Electrical Resistivity, ohm•circ mil/ft | 788 |
μΩ•m | 1.31 |
Corrosion Resistance of Incoloy MA956 Wire Mesh:
The high aluminum content of Incoloy alloy MA956 Wire Mesh allows the information of a thin, highly adherent and protective surface layer of alumina. This process occurs in a wide range of atmospheres, even when levels of oxygen are low. The layer is very effective in reducing the rates of further oxidation. Should the protective layer be mechanically damaged, the high aluminum content of the alloy allows the formation of fresh alumina which heals the affected area.
Incoloy alloy MA956 Wire Mesh may be used under oxidizing conditions up to 1300°C (2370°F), much higher than conventional nickel-chromium alloys. For optimum environmental resistance of machined or cut surfaces, particularly in reducing atmospheres, it is recommended that all traces of lubricants and other foreign matter are removed prior to pre-oxidizing for service in air for 2 hours at 1100°C(2012°F).
Incoloy alloy MA956 Wire Mesh may be used under oxidizing conditions up to 1300°C (2370°F), much higher than conventional nickel-chromium alloys. For optimum environmental resistance of machined or cut surfaces, particularly in reducing atmospheres, it is recommended that all traces of lubricants and other foreign matter are removed prior to pre-oxidizing for service in air for 2 hours at 1100°C(2012°F).
Mesh's Woven Method
Expanded Mesh |
Perforated Mesh |
Twill Weave mesh |
Dutch Twill Weave Cloth |
Dutch Weave Mesh |
Reverse Dutch Weave Cloth |
5-heddle Weave Mesh |
Cross twill weave |
Plain Weaving Mesh |
Product Description: The product produced by us is of good quality and is priced reasonably.
Competitive price: The labour cost and cost on procuring the raw materials is low and hence the manufacturing cost is reasonable. We provide high facility in short producing cycle and have strong adaptive capacity in producing variation of products.
High quality assured: The work done by us has a good command of advanced technological process in the respect of smelting, rolling, drawing and heat treatment up to finished products. The chemical analysis department, the physical testing department and the quality control department all operate an all-round monitoring of our products from raw materials to final products.
Packing Process & Transportation:
Packaging: Seal up, with plastic inside and wooden case or carton outside; or according to the customer's requirements.
Transportation: By air: Beijing International Airport OR By sea: Trianjin Seaport
We provide our customers with excellent services. If you want more detailed information of this product or related problems, please contact with us, we will reply as soon as possible (general in 24 hours).
