AQ Series
- Low cost solution to powerline noise at high frequencies
- High common and differentialmode performance from 10KHz to 1GHz
- Available with an IEC inlet,fuseholder and switch
- Ideal for applications wherecomputers are used to process secret or confidential information
Ordering Information

Available Part Numbers
3VAQ3 | 6VAQ3 |
3VAQ8F | 6VAQ8F |
3VAQ8FS | 6VAQ8FS |
Specifications
Maximum leakagecurrent, each Line to Ground: | |||
3A Models | 6A Models | ||
@ 120 VAC 60 Hz | 1.2mA | .7mA | |
@ 250 VAC 50 Hz | 2.3mA | 1.2mA | |
Hipot rating (oneminute): | |||
Line to Ground | 2250 VDC | ||
Line to Line | 1450 VDC | ||
Operating Frequency: | 50 / 60 Hz | ||
Rated voltage(max.): | 250 VAC | ||
Rated Current: | 3 or 6 Amps | ||
Operating Ambient Temperature Range(at rated current Ir): | |||
-10°C to +40°C | |||
In an ambienttemperature (Ta) higher than +40°C the maximum operating current (Io) is calculated as follows: Io = Ir √(85-Ta)/45 | |||
Electrical Schematic
3A Models


6A Models


Accessories
GA400: NEMA 5-15P to IEC 60320-1 C13 line cord

Case Styles

Case Styles
3VAQ3



3VAQ8F


3VAQ8FS


6VAQ3

6VAQ8F


6VAQ8FS


Recommended Panel Cutouts


Performance Data
Typical Insertion Loss
Measured in closed 50 ohm system

Typical Insertion Loss
Measured in closed 50 ohm system
3VAQ

6VAQ


Minimum Insertion Loss in dB:
Measured in closed 50 ohm system
Common Mode / Asymmetrical (Line to Ground)
Differential Mode / Symmetrical (Line to Line)


Minimum Insertion Loss in dB:
Measured in closed 50 ohm system
Common Mode / Asymmetrical (Line to Ground)
Current Rating | Frequency - MHz | ||||||||
.01 | .1 | .5 | 1 | 10 | 50 | 100 | 300 | 1000 | |
3A | 10 | 80 | 88 | 88 | 100 | 100 | 100 | 93 | 85 |
6A | 26 | 59 | 80 | 80 | 100 | 100 | 100 | 93 | 85 |
Differential Mode / Symmetrical (Line to Line)
Current Rating | Frequency - MHz | ||||||||
..01 | .1 | 1 | 10 | 30 | 100 | 300 | 300 | 1000 | |
3A | 6 | 51 | 78 | 88 | 100 | 100 | 100 | 93 | 85 |
6A | 10 | 65 | 86 | 95 | 100 | 100 | 100 | 93 | 85 |



