FL Series
- Specifically designed forfluorescent lights
- Suitable for industrialenvironments
- UL Listed for aftermarketinstallation
Ordering Information
Available Part Numbers
Case Styles
3FL3 |
Case Styles
Specifications
Maximum leakagecurrent, each Line to Ground: | ||
@ 125 VAC 60 Hz | 3.0 mA | |
@ 280 VAC 50 Hz | 6.0 mA | |
Hipot rating (oneminute): | ||
Line to Ground | 1560 VAC | |
Line to Line | 1560 VAC | |
Operating Frequency: | 50 / 60 Hz | |
Rated voltage: | 125 / 280 VAC | |
Rated Current: | 3.9 Amps | |
Operating Ambient Temperature Range(at rated current Ir): | ||
-10°C to +40°C | ||
In an ambienttemperature (Ta) higher than +40°C the maximum operating current (Io) is calculated as follows: Io = Ir √(85-Ta)/45 |
Electrical Schematic
Case Dimensions
Performance Data
Typical Insertion Loss
Measured in closed 50 ohm system
Part No. | A | B | C | D | E |
(max.) | (max.) | (max.) | ± .015 | (max.) | |
±.38 | |||||
3FL3 | 3.35 | 2.07 | 1.16 | 2.938 | 2.57 |
85.09 | 52.58 | 29.5 | 74.63 | 65.3 | |
Performance Data
Typical Insertion Loss
Measured in closed 50 ohm system
3FL3
Minimum Insertion Loss in dB
Measured in closed 50 ohm system
Differential Mode / Symmetrical (Line to Line)
Minimum Insertion Loss in dB
Measured in closed 50 ohm system
Differential Mode / Symmetrical (Line to Line)
Current Rating | Frequency - MHz | ||||||
.15 | .3 | .6 | 1 | 4 | 10 | 20 | |
3.9 A | 10 | 18 | 34 | 46 | 56 | 38 | 26 |