High precision melt pressure transmitter

PT124B-112/112T Series Melt Pressure Transducer can achieve the pressure and temperature measuring. The model PT124B-112T is with temperature-measuring transducer. This series adopt special material and alloy elastic membrane to low down temperature draft and improve accuracy. The zero & full span can be calibrated, with amplify signal be connected with PLC, and internal 80% calibration. It has the wide application in high-temp liquid pressure measurement and control such as Chemical & Fiber equipment, polyester equipment . Can replace Dynisco / Gefran /GP50 etc. international brand absolutely .


Application  
Fiber equipment
Plastic andRubber manufactureing equipment
Other melt pressure measurement and control

Feature
High accuracy
Stainless steel welding
Easy to install
Internal 80% calibration
Excellent stability and repeatability

Pressurerange:	0….3.5MPa to 0….150MPa(0-500psi,,,0-20000psi)
Output:	2mV/V; 3.33mV/V;0~5V; 0~10V; 4-20mA;
Input voltage:	10(6~12V)DC; 24(12~36V)DC
Accuracy:	±0.25FSO; ±0.5%FS (including linearity , Repeatability & Hysteresis )
Repeatability:	±0.2% FSO
Construction:	Wheatstonebridge
Bridge resistance:	Input: 345 Ohms Minimum; Output: 350 Ohms±10%
Overload pressure:	1.5×FSO
Internal shunt calibration:	80%±1%
Insulation Resistance:	200Megohms @100Vdc
Standardwetted Parts	Diaphragmcoated 15-5PH SST
Mounting Torque	500inch/lbs , maximum
Max.Diaphragm Temp:	0~400℃
Electronic operating temperature:	-25℃ -85℃
Electricconnector:	6PIN
Thermocoupletype:	J,K,E,PT100Optional(PT124B-112T)
Processconnector:	1/2″-20UNF,M14×1.5, M18×1.5(Customer design)

Model	Range(bar)	Output	ScrewThread	Electricconnection	Other requirement
PT124B-112/112T	---	---	---	---	---
Example:PT124B-112-500Bar-4/20mA-1/2-20UNF-6PIN