Fixed pump plastic injection molding machine;
Parameters of 90T plastic machinery as below;
| Parameter | Unit | Parameter Value (SSF900) | ||
| Screw diameter | mm | A | B | C |
| 32 | 35 | 38 | ||
| Screw L/D ratio | L/D | 24.8 | 22 | 20 |
| shot volumn (theoretical) | Cm3 | 112 | 134 | 158 |
| injection weight(PS) | g | 102 | 122 | 144 |
| plasticizing capacity | g/s | 10.5 | 11.6 | 13 |
| injection rate | g/s | 73 | 88 | 103 |
| injection pressure | Mpa | 208 | 174 | 148 |
| screw speed | rmp | 220 | ||
| clamp force | KN | 900 | ||
| open stroke | mm | 290 | ||
| distance between tie bars (W*H) | mm | 360*320 | ||
| max mould thickness | mm | 380 | ||
| min mould thickness | mm | 150 | ||
| ejector stroke | mm | 80 | ||
| ejector force | KN | 31 | ||
| ejector number | PC | 5 | ||
| dia of mould location hole | mm | 125 | ||
| max pump pressure | Mpa | 16 | ||
| pump motor power | KW | 9 | ||
| heating power | KW | 6 | ||
| machine dimension | m | 4*1.27*1.75 | ||
| machine weight | T | 2.9 | ||
| oil tank capacity | L | 150 | ||
The injection moulding machine was featured with Strong clamping with rapid and stable,to meet the strict clamping condition. Mold plates and spare parts of clamping unit is machined by ourselves, the critical dimensions are strictly controlled to make sure fit assembly, of which can fully display the function with good working condition.
We have a functional team, detail refer our organization chart;
