Price competitive energy saving injection molding machine
We can aslo recommend the most fit auxilaries for you of this 110T plastic injection molding machine, details as below;
Autoloader;
Hopper dryer;
Mold temperature controller;
Robot;
Water cooler;
Oil temperature controller;
Plastic dehumidizer;
Oil bypass filter;
Hopper magnet;
Mold clamps;
Water cooler
118T plastic machinery parameters is below;
| Parameter | Unit | Parameter Value (SSF1180) | ||
| Screw diameter | mm | A | B | C |
| 35 | 38 | 42 | ||
| Screw L/D ratio | L/D | 22 | 20.2 | 18.4 |
| shot volumn (theoretical) | Cm3 | 163 | 192 | 235 |
| injection weight(PS) | g | 148 | 175 | 213 |
| plasticizing capacity | g/s | 5.2 | 6.2 | 7.5 |
| injection rate | g/s | 89 | 105 | 128 |
| injection pressure | Mpa | 219 | 186 | 152 |
| screw speed | rmp | 210 | ||
| clamp force | KN | 1180 | ||
| open stroke | mm | 350 | ||
| distance between tie bars (W*H) | mm | 370*370 | ||
| max mould thickness | mm | 380 | ||
| min mould thickness | mm | 150 | ||
| ejector stroke | mm | 120 | ||
| ejector force | KN | 38 | ||
| ejector number | PC | 5 | ||
| dia of mould location hole | mm | 125 | ||
| max pump pressure | Mpa | 16 | ||
| pump motor power | KW | 13 | ||
| heating power | KW | 7.3 | ||
| machine dimension | m | 4.3*1.28*1.9 | ||
| machine weight | T | 3.4 | ||
| oil tank capacity | L | 230 | ||
Strong clamping with rapid and stable,to meet the strict clamping condition. Mold plates and spare parts of clamping unit is machined by ourselves, the critical dimensions are strictly controlled to make sure fit assembly, of which can fully display the function with good working condition.
.jpg)
.jpg)
