Hydraulic Transmission
Closed hydraulic circuit for stepless speed variation in both rotating directions.
This machine is provided with a pull pre-setting system that maintains the pre-set pulling value(also when the speed is reduced to "0")by automatically adjusting the operation speed according to the friction and unexpected loads which may occur.
Configuration
Negative self-acting hydraulic brake
Hydraulic dynamometer with set-point and automatic control of maximum pull.
Hydraulic oil cooling system
Control instruments for hydraulic system and diesel engine.
Rigid axle for towing at max speed of 30km/h.
On board reel winder with automatic level wind,suitable for standard reels.
Pull pre-setting system
Mechanical front stabilizer
Grounding connection point.
Performance
Characteristics
Engine
Main Configuration
Performance
Max pull | 40kN |
Speed at max pull | 3.6km/h |
Max speed | 5km/h |
Pull at max speed | 17.5kN |
Note:the basic machineperformance is calculated at 20°C and at sea level | |
Characteristics
Bull-wheel diameter | 400mm |
Max rope diameter | 16mm |
Mass | 2500kg |
Dimensions | 3500x2000x2300 |
Engine
Diesel | 60Kw/2000 rpm |
Cooling system | water |
Electrical system | 12V |
Main Configuration
Engine | Cummins(Jointventure)water cooled |
Main variable pump | |
Main Motor | |
Reducer | RR(Italian) |
Main Hydraulic valve | Rexroth(BOSCH) |
Radiator | AKG |
Hydraulic instrument | WIKA |
The attached tools with machines:
SN | Designationand specification | number | Remark |
1 | 10 setdouble end solid wrench | 1 | |
2 | 32-36 doubleend solid wrench | 1 | |
3 | 50-55 doubleend solid wrench | 1 | |
4 | 19-24ratchet wheel wrench | 1 | Order number:05104 |
5 | 10 setinner hexagon spanner | 1 | |
6 | 160mmgripping tongs | 1 | |
7 | 10 inchmonkey wrench | 1 | |
8 | 4 inchplus driver | 1 | |
9 | 4 inchminus screw driver | 1 | |
10 | 2 poundhammer | 1 | |
11 | Filterwrench 70-130mm | 1 | |
12 | B seriesengine operation and maintenance manual | 1 | |
13 | SA-YQ40hydraulic puller instruction for use | 1 | |
14 | SA-YQ40hydraulic puller certificate of conformity | 1 |
Working picture:
Shipment
1. The machines will be shipped in container
2. We will ship the products within one month normally after receiving the payment.
3. Stock is available for standard product.
Payment
1. We accept T/T and L/C.
2. Please send swift copy of T/T if you arrange payment by T/T
3. Please send us the L/C draft to us before issue L/C.
Why choose us:
1. High quality and competitive price
2. Leading and biggest manufacture for stringing equipment in China.
3. 25 years of production experience and more than 1000 customers in the country and abroad market. The machines have been sold to more than 20 countries.
4. Big stock condition for fast shipment.
5. Detailed pre-sales service and fast active after-sales service. Response within 12 hours after-sales service
