Comprehensive regulation
Workpieces type | Output voltage | 1ST air | 2sec air | Painting distance |
Big size new | 80-100kv | 4-6kg/cm2 | 2-3kg/cm2 | 15-20cm |
Corner,sides | 40-60kv | 2-3kg/cm2 | 0.5-1 kg/cm2 | 10-15cm |
repaint | 20-30kv | 2-3kg/cm2 | 0.5-1kg/cm2 | 15-20cm |
A. Changing powder color
1)Clean the outlet hose hopper completely
2)blow into the powder hose with compressed air
3)clean the GUN
4)put the powder to be used into hopper and finish all the preparation jobs
5)turn and spray the GUN toward BOOTH momentarily before the work begains
B.How to manage
Routine maintenance of equipment prologn product life and keeps its performance uniform
1. Daily check -----INJECTOR cleaning and INSERT SLEEVE worn-down
^.POWDER HOSE cleaning
^GUN cleaning
2.weekly check ….cleans the hopper , injector and GUN
..powder should not be put in the hopper just before work
…..check the ground line between CONTROL UNIT , BOOTH and CONVERYOR
^.After checking air dehydrator , any water in it should be removed , the air ,but for checking the presence of moisture in it
C. Checking for shutdown lasting 2-3 days
1)Turn off the power switch
2)Clean the CONTROL UNIT
3)Remove the imput air and put it away
4)check above -1 .Daily check
5)Remove powder from HOPPER
Technical Data
Power range 220v
Frequency 50/60HZ
Temperature range in use -10 ℃+50 ℃
Powder Gun
Gun weight: ^^^ 500G
Rated output voltage ^… 24VDC
Input voltage ^^… - 200kv
Maximum output current ^… 180Ua(max)
Maximum output voltage^^ 0-100KV ( adjustable)
Maximum powder injection :^… 600g/min
Polarity ^^^ negative (-)
Pneumatic technical spec
Maximum input-air pressure ^^.. 8kg/cm
Optimum input-air pressure^.. 6kg/cm
Minimum input-air pressure ^ 4kg/cm
Maximum water vapor content or compressed air ….. 1.4g/N m3
Maximum oil vapor content of compressed air ^.. 0.1ppm
Maximum cimpressed-air consumption^… 13.2 m3/h
