Product Item No.: PD602S-A
This product adopts brushless generator for power generation to charge its inside 600mAh/3.6V rechargeable lithium battery. The power stored is transformed to the LEDs via a switch to control its on and off, and charge for mobile phone.
User's Manual
User's Manual
[Recharging operation]
Crank to charge its inside battery: hold the unit and crank the handle by the other hand at the speed of 3 circles per second to charge its inside battery.
Under the process of charging the indicator will be red
Plug USB charger into DC in/DC out hole to charge its inside battery.
Under the process of charging the indicator will be red
[Switch Operation]
Push the switch up,the light is on; Push down, The light is off.
[Charge the mobile devices]:
1.Select a suitable adaptor for the device
2.Plug the adaptor into the connector cord and the device
3.Plug the connector cord into the DC out port
4.Push the flashlight switch, then device will be chargerd automatically
[Product Patent number]
Product patent number:ZL 2010 3 0506011.X
[Product Features]
Cranking for power, low noise but high efficiency.
Ultra bright lighting.
It can be used as illumination torch.
Controlled by electric switch, long life-span.
Newfangled design which can charge the light by cranking, Never need batteries.
Newfangled design which can charge the light by USB charger.
Newfangled design which can charge the mobile phone.
[Main technician]
Full charging time by USB adaptor:3hours
Working time after full charged:more than 5hours
Lighting time after 1 minute cranking:15mins
The Max. Luminous flux:20lumens
Battery Type: 600mAh rechargeable battery
Mobile phone charging out put: 5.5v,500mA
[Product size and net weight]
Product size:50*45*166mm
Product net weight:115g
[Color box packing]
100pcs/ctns
50.5*33.5*38cm
G.W:17.5KGS N.G:15.5KGS
[Cautions]
Don't point at eyes directly so as not to hurt the eyes.
Pay attention to the holding gesture when cranking so as not to hurt your fingers.
In order to assure the using life of the battery and the mechanical parts, please pay attention to the instructions below:
a) When the light is dim, it means the battery is lack of power badly, please turn off the light or crank it for a while or use USB charger to charge the light for a while
b) please crank it for at least 1 minute or use USB charger to charge the light for a while once a month.
Do not place this product in where temperature or humidity is high.
Do not drop or hit this product.
The product will be a little heated when cranking for a long time.
Pictures of LED solar dynamo flashlight torch
Pictures of LED solar dynamo flashlight torch
Charging Iphone:
USB rechargeable
