- Cost-effective
- Tubular design
- WGA, WGB and WGC versions designed to comply with leakage current for fixed appliances not easily moved from one place to another
- WGD, WGE and WGF versions designed to comply with leakage current requirements for appliances which may be easily moved from one place to another
- Available in a variety of styles
Available Part Numbers
Click on any part number for 3D CAD models, customer drawings, distributor stock status and eCommerce Links.
16WGA1 | 16WGD1 |
16WGB1 | 16WGE1 |
16WGC1 | 16WGF1 |
16WGA3 | 16WGD3 |
16WGB3 | 16WGE3 |
16WGC3 | 16WGF3 |
16WGA7 | 16WGD7 |
16WGB7 | 16WGE7 |
16WGC7 | 16WGF7 |
Maximum leakage current, each Line to Ground: | |||
A, B & C Models | D, E & F Models | ||
@ 120 VAC 60 Hz | 0.76 mA | 0.10 mA | |
@ 250 VAC 50 Hz | 1.27mA | 0.20 mA | |
Operating Frequency: | 50 / 60 Hz | ||
Rated voltage (max.): | 250 VAC | ||
Rated Current: | 16 Amps | ||
Operating Ambient Temperature Range (at rated current Ir): | |||
-10°C to +40°C | |||
In an ambient temperature (Ta) higher than +40°C the maximum operating current (Io) is calculated as follows: Io = Ir √(85-Ta)/45 |
Case Styles
Typical Dimensions: | ||
Wire Leads(5): | 4.0 [101.6] min. 18AWG UL1015 | |
Mounting Stud(1): | M8 x 1.25 | |
Wire Colors: | ||
L(2): | Brown | |
N(4): | Blue | |
U(1): | Brown | |
Gnd: | Green / Yellow | |
U(3): | Blue |
Typical Dimensions: | ||
Terminals(3): | .250 [6.3] with .07 [1.8] Dia. hole | |
RAST 5: | Unkeyed RAST 5 Header interface* | |
Mounting Stud(1): | M8 x 1.25 |
* The RAST 5 interface mates with any two-position (keyed or unkeyed) TE Connectivity
Standard Power Timer connector or RAST 5 Positive Lock Mark III connector
Performance Data
Standard Power Timer connector or RAST 5 Positive Lock Mark III connector
Performance Data
Minimum Insertion Loss in dB: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Measured in closed 50 ohm system | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Common Mode / Asymmetrical (Line to Ground) | Differential Mode / Symmetrical (Line to Line) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|