Grade: D2, Cr12Mo1V1, 1.2379, X160CrMoV12, BD2, XW-42
Chemical composition
Country | Steel NO. | C | Si | Mn | Cr | Mo | V | P | S | Other |
China GB | Cr12Mo1V1 | 1.40-1.60 | ≤0.060 | ≤0.60 | 11.0-13.0 | 0.70-1.20 | ≤1.10 | ≤0.030 | ≤0.030 | Co≤1.00 |
USA AISI | D2 | 1.40-1.60 | 0.30-0.50 | 0.30-0.50 | 11.0-13.0 | 0.70-1.20 | (0.80) | ≤0.025 | ≤0.025 | Co:0.60 |
Japan JIS | SKD11 | 1.40-1.60 | ≤0.40 | ≤0.60 | 11.0-13.0 | 0.80-1.20 | 0.20-0.5 | — | — | Ni:0.50 |
Germany | 1.2379 | 1.50-1.60 | 0.10-0.40 | 0.15-0.45 | 11.50-12.50 | 0.60-0.80 | 0.90-1.10 | ≤0.030 | ≤0.030 | — |
France | X160CrMoV12 | 1.45-1.70 | 0.10-0.40 | 0.15-0.45 | 11.0-13.0 | 0.70-1.10 | 1.00 | — | — | — |
Size
Round bar | Diameter (mm) | Length (mm) | |
50~500 | 2000~5800 | ||
plate/sheet | Thickness (mm) | Width (mm) | Length (mm) |
20~400 | 80~1000 | 2000~5800 |
Pre-heat treatment
1.1.2379 die steel bars Ingot and billet tempering technology: heat temperature870-890°c,keep temperature 2-4H, furnace cold below,
out and air cold.
2.1.2379 die steel bars Steel is othermal technology: heat temperature 840-860°c, keep termperatrue 2H, furnace to 720-740°c, keep 4H, furnce cold below 550°c, out and air cold, tempering hardness 207-255HBS.
Characteristic
1.Good quenching, abrasion resistance, ability to resist rust and corrosion.
2.Low heat treatment deformation.
3.Surface treatment : Black + Machined + turned + polished
4.Delivery state: annealed / ingot / processing
Application
1.2379 die steel bars Suitable for impact and extrusion molds of high output, thread twisting molds, molds for ceramics, molds for electric
circuit plates and plastic molds of high output.
Production EquipmentProcessing Equipment
Black Steels
Peeling Steels