(1)Brief introduction
Vacuum table V8, which can replace the traditional fixture, is to fix the flat workpieces, such as board, glass, marble, and other panel flat workpieces on the work table. Characteristics: great strength,prompt and convenient operation,durable using and not to hurt the workpieces. It creates more cross-cutting vertical and horizontal grooves forming a work surface with many squares or rectangles. It can be compatible with workpieces of different sizes. The warranty period is half one year.
(2)Use guide:
1. Chassis
2. gland strip: according to the size of the work panel, work table of different sizes can be formed using the gland strip with the vacuum suction as the center.(Note: only under the sealed state, the work panel can successfully fix the processing panel)
3. Work Panel: combined with the seal, set the size of sealed panel according the demand.
4. Air source plug: connect to air source(air compressor)
5. Switch
6. Flow control valve: adjust the air flow according to the size of the panel
7. Vacuum suction :this, as the corn, combines with the special gland strip to suitable work table.
(3)Technical data:
weight | 5.8kg | size | 320×310×230mm |
pressure | 3-6kg/cm2 |
.jpg)
