filter wire mesh cloth
material: Black Iron Wire,stainless steel wire,nickel wire,SS302,AISI304,AISI316,AISI316L,321 and 430.
Woven pattern: Plain weave,twill weave,diagonal weave, herringbone twilled weave, Dutch weave,reverse dutch weave.
Application: Use for filters in rubber industry, plastic industry and grain industry.
black wire cloth can be supplied from 6 mesh to 80 mesh for plain weave and be supplied from 1 2 x 64mesh to 40 x 200mesh for dutch weave,exact specification pls check following list:
plain steel wire mesh,plain weave
| | |
8 | 0.71 | 2.47 |
10 | 0.65 | 1.89 |
12 | 0.60 | 1.52 |
14 | 0.50 | 1.31 |
16 | 0.40 | 1.19 |
20 | 0.40 | 0.87 |
24 | 0.35 | 0.71 |
30 | 0.30 | 0.55 |
40 | 0.25 | 0.39 |
50 | 0.20 | 0.31 |
60 | 0.17 | 0.25 |
80X70 | 0.135 | |
100X90 | 0.11 | |
Plain Steel Wire Cloth, Dutch Weave
| |
12X64 | 0.58/0.64 |
14X88 | 0.50/0.33 |
24X110 | 0.36/0.25 |
30X150 | 0.23/0.18 |
40X200 | 0.18/0.13 |
stainless steel wire mesh for filtering
General Use: Woven stainless steel Filter Wire Cloth is mainly used in filtering and screening in airspace, particle separation and sifting fuel filters, hydraulic fluid filters, gas diffusers oil and chemical.
stainless steel wire mesh is usually made with four typical weaving patterns, that is Plain Weave, Twill Weave, Plain Dutch Weave and Twilled Dutch Weave,Reverse Dutch Weave.
|
plain weave | twill weave | plain dutch weave | twill dutch weave |
Specification List of Stainless Steel Plain Woven Wire Mesh |
Mesh/Inch | Wire Diameter | Aperture | Open Area | Weight(LB) /100 Square Foot | Inch | MM | Inch | MM | 1x1 | .080 | 2.03 | .920 | 23.37 | 84.6 | 41.1 | 2X2 | .063 | 1.60 | .437 | 11.10 | 76.4 | 51.2 | 3X3 | .054 | 1.37 | .279 | 7.09 | 70.1 | 56.7 | 4X4 | .063 | 1.60 | .187 | 4.75 | 56.0 | 104.8 | 4X4 | .047 | 1.19 | .203 | 5.16 | 65.9 | 57.6 | 5X5 | .041 | 1.04 | .159 | 4.04 | 63.2 | 54.9 | 6X6 | .035 | .89 | .132 | 3.35 | 62.7 | 48.1 | 8X8 | .028 | .71 | .097 | 2.46 | 60.2 | 41.1 | 10X10 | .025 | .64 | .075 | 1.91 | 56.3 | 41.2 | 10X10 | .020 | .51 | .080 | 2.03 | 64.0 | 26.1 | 12X12 | .023 | .584 | .060 | 1.52 | 51.8 | 42.2 | 12X12 | .020 | .508 | .063 | 1.60 | 57.2 | 31.6 | 14X14 | .023 | .584 | .048 | 1.22 | 45.2 | 49.8 | 14X14 | .020 | .508 | .051 | 1.30 | 51.0 | 37.2 | 16X16 | .018 | .457 | .0445 | 1.13 | 50.7 | 34.5 | 18X18 | .017 | .432 | .0386 | .98 | 48.3 | 34.8 | 20X20 | .020 | .508 | .0300 | .76 | 36.0 | 55.2 | 20X20 | .016 | .406 | .0340 | .86 | 46.2 | 34.4 | 24X24 | .014 | .356 | .0277 | .70 | 44.2 | 31.8 | 30X30 | .013 | .330 | .0203 | .52 | 37.1 | 34.8 | 30X30 | .012 | .305 | .0213 | .54 | 40.8 | 29.4 | 30X30 | .009 | .229 | .0243 | .62 | 53.1 | 16.1 | 35X35 | .011 | .279 | .0176 | .45 | 37.9 | 29.0 | 40X40 | .010 | .254 | .0150 | .38 | 36.0 | 27.6 | 50X50 | .009 | .229 | .0110 | .28 | 30.3 | 28.4 | 50X50 | .008 | .203 | .0120 | .31 | 36.0 | 22.1 | 60X60 | .0075 | .191 | .0092 | .23 | 30.5 | 23.7 | 60X60 | .007 | .178 | .0097 | .25 | 33.9 | 20.4 | 70X70 | .0065 | .165 | .0078 | .20 | 29.8 | 20.8 | 80X80 | .0065 | .165 | .0060 | .15 | 23.0 | 23.2 | 80X80 | .0055 | .140 | .0070 | .18 | 31.4 | 16.9 | 90X90 | .005 | .127 | .0061 | .16 | 30.1 | 15.8 | 100X100 | .0045 | .114 | .0055 | .14 | 30.3 | 14.2 | 100X100 | .004 | .102 | .0060 | .15 | 36.0 | 11.0 | 100X100 | .0035 | .089 | .0065 | .17 | 42.3 | 8.3 | 110X110 | .0040 | .1016 | .0051 | .1295 | 30.7 | 12.4 | 120X120 | .0037 | .0940 | .0064 | .1168 | 30.7 | 11.6 | 150X150 | .0026 | .0660 | .0041 | .1041 | 37.4 | 7.1 | 160X160 | .0025 | .0635 | .0038 | .0965 | 36.4 | 5.94 | 180X180 | .0023 | .0584 | .0033 | .0838 | 34.7 | 6.7 | 200X200 | .0021 | .0533 | .0029 | .0737 | 33.6 | 6.2 | 250X250 | .0016 | .0406 | .0024 | .0610 | 36.0 | 4.4 | 270X270 | .0016 | .0406 | .0021 | .0533 | 32.2 | 4.7 | 300X300 | .0051 | .0381 | .0018 | .0457 | 29.7 | 3.04 | 325X325 | .0014 | .0356 | .0017 | .0432 | 30.0 | 4.40 | 400X400 | .0010 | .0254 | .0015 | .370 | 36.0 | 3.3 | 500X500 | .0010 | .0254 | .0010 | .0254 | 25.0 | 3.8 | 635X635 | .0008 | .0203 | .0008 | .0203 | 25.0 | 2.63 |
|
Twill weave: Each weft wire passes alternately over two, and then under two successive warp wires and each warp wire passes alternately over two and under two successive weft wires. It is possible to be used to allow a heavier than standard wire diameter. We can supply the mesh from 30 mesh to 500 mesh.
The specifications listed below are commonly required.
Specification List of Stainless Steel Twill dutch weave Wire Mesh
Mesh/Inch | Wire Diameter | Absolute Filtration Fineness µm | Nominal Filtration Fineness µm |
20x250 | .0098x.0079 | 110-120 | 98-105 |
30x360 | .0098x.0060 | 90-100 | 80-84 |
40x560 | .0070x.0040 | 70-75 | 47-52 |
120x400 | .0040x.0025 | 50-55 | 37-43 |
120x160 | .0040x.0025 | 40-45 | 28-32 |
80x700 | .0040x.0030 | 35-40 | 24-26 |
200x600 | .0024x.0018 | 28-32 | 19-21 |
165x800 | .0028x.0020 | 24-26 | 14-16 |
165x1400 | .0028x.0016 | 16-18 | 9-11 |
200x1400 | .0028x.0016 | 12-14 | 5-6 |
250x1400 | .0022x.0016 | 11-12 | 3-4 |
325x2300 | .0015x.0010 | 8-9 | 2-3 |
Plain dutch weave: Woven as a plain weave, but with the warp wires of greater diameter than the weft wires. The weft wires are very close together so that a so-called zero-mesh structure is formed; while the warp wires are thicker and arranged wider apart.
Twill dutch weave: "Twill" indicates the warp and weft wires pass alternately above two and below two wires. "Dutch" refers to the use of a heavier warp wire diameter in conjunction with a lighter weft wire diameter. This weave shows a combination of twill and dutch weave.
Specification List of Stainless Steel dutch weave Wire Mesh
Mesh/Inch | Wire Diameter | Absolute Filtration Fineness µm | Nominal Filtration Fineness µm |
8X85 | .014X.0126 | 318 - 340 | 250 - 255 |
12X64 | .024X.0165 | 270 - 285 | 200 - 205 |
14X88 | .020X.013 | 225 - 245 | 150 - 155 |
20X150 | .0098X.007 | 155 - 165 | 100 - 105 |
24X100 | .015X.010 | 115 - 125 | 80 - 85 |
30X150 | .009X.007 | 95 - 100 | 65 - 70 |
40X200 | .007X.0055 | 65 - 70 | 55 - 60 |
50X250 | .0055X.0045 | 55 - 60 | 40 - 45 |
80X400 | .0049X.0028 | 43 - 48 | 35 - 40 |