1.Type ofpressure:150,300,450,600,800,1000PSI
2.Type of length:1~7 core
3.The appearange of color:Normally iswhite. But Customers' design are warmly welcome.
4.Special specifications can becustomized
Technical requirements
1.The manugacturing method of ourFRP pressure vessel(membrane housing) is in accordance with the standardJC692-1998;
2.Desigh for the pressure pfthe FRP pressure vessel(membranehousing)is150,300,450,600,800,1000PSI. And the permitted scope ofworking temperature is -7°C~49°C;
3.The permeability test of themembrane housing with a way of using water pressure.The test pressure is 1.5times of the standard pressure..
| MainInstallation size | |||||||
| Workingpressure | Module | L(mm) | S(mm) | Workingpressure | Module | L(mm) | S(mm) |
| 300PSI | 1 | 1470 | 700 | 1000PSI | 1 | 1524 | 700 |
| 2 | 2486 | 1454 | 2 | 2540 | 1454 | ||
| 3 | 3502 | 2064 | 3 | 3556 | 2064 | ||
| 4 | 4518 | 1646x2 | 4 | 4574 | 1646x2 | ||
| 5 | 5536 | 2000x2 | 5 | 5590 | 2000x2 | ||
| 6 | 6552 | 2357x2 | 6 | 6606 | 2357x2 | ||
| 7 | 7568 | 3084x2 | 7 | 7622 | 3084x2 | ||
Deatailed info ofFRP Pressure Vessel
Instanation diagram of 8 inch end port FRP Pressure Vessel
Completed figure of FRP Pressure Vessel
one sideof FRP Pressure Vessel
our producing department
We have been participating in various exhibitions
Our products are widely selled around the world.
.jpg)
