ELECTRICAL SPECIFICATIONS
Parameter | Values | Conditions | |
INPUT | AC Voltage | 90 ~ 305 Vac | |
Frequency Range | 47 ~ 63Hz |
AC Current (110V input) | 0.43A | Full load, Vin=110V | |
AC Current (220V input) | 0.21A | Full load, Vin=220V | |
Inrush Current | 33 A | Cold start, Vin=230V, Full load, | |
Leakage Current | 0.6mA | Vin=277V, 50Hz | |
OUTPUT | Top Output Power | 41W | |
Set-up Delay Time | <2s | ||
Current Accuracy | ±5% | ||
Line Regulation | ±1% | ||
Load Regulation | ±3% | ||
PROTECT | Over Voltage Protect | 1.2 Vo | Latch mode. The power supply shall return to normal operation only after the power is turn-on again. |
Over Temperature Protect | 110℃ | Protection type : Shut down o/p voltage, re-power on to recover | |
Short Circuit Protect | No damage shall occur when any output operating in a short circuit condition. The power supply shall be self-recovery when the fault condition is removed. | ||
SAFETY & EMC | WITHSTAND VOLTAGE | I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC | |
ISOLATION RESISTANCE | I/P-O/P:100M Ohms/500VDC/25°C/70%RH | ||
SAFETY STANDARDS | EN61347-1, EN61347-2-13 | ||
EMI | EN55015 | ||
EMS | EN61000-3-2,EN61000-3-3,EN61000-4-2,EN61000-4-3,EN61000-4-4,EN61000-4-5,EN61000-4-6,EN61000-4-8, EN61000-4-11, EN61547 | ||
ENVIRONMENT | Working Temp., Humidity | -35°C ~ +70°C; 10 ~ 100% RH non-condensing | |
Storage Temp., Humidity | -40°C ~ +85°C; 5 ~ 100% RH | ||
LIFE | MTBF | 250,000 hours | |
Life Time | 61,000 hours | ||
OTHERS | Dimension | Inches (L*W*H) 6.77*1.89*1.36 | |
Millimeters (L*W*H) 172*48*34.5 | |||
Net Weight | 455g | ||
FEATURES
* Universal AC input(90~305VAC)
* High Efficiency (up to 91%)
* Build-in Active PFC (Typical 0.99)
* IP67 design for indoor or outdoor installations
* 100% full load burn-in test
*All-Round Protection: OVP, SCP, OTP
* 3 years warranty
APPLICATION NOTES
NOTE:
1. All specifications are typical at 25°C unless otherwise stated.
2. The "Efficiency" & "PF" values are measured at full load, after the unit is thermally stabilized, otherwise they will be lower about 1%.
3. The "Ripple & Noise" values are measured by 20MHz bandwidth oscilloscope and the output paralleled a 0.1uF ceramic capacitor and a 10uF electrolytic capacitor.
4."SM":Metal shell
5."W":Wide voltage input
6."C":Constant current output
7."SS":Single-output, Conventional products
MECHANICAL SPECIFICATIONS
Our services
1.Any your customized lighting we can help you to design and put into product, because we have professional R&D team
2.Your inquiry related to our products will be replied in 24 hours
3.Well-trained and experienced staffs to answer your questions
4.Competitive prices and good quality for our friendship.
5.OEM,ODM services are provided
