SBM4100-GM01 Series
Single Channel Gain Block Small Form Factor EDFA Module
Description
a. Idealphotonics SBM4100-GM01 is a single-channel gain block booster EDFA module, adopts subminiature 40 × 70 × 12mm compact package. The module uses high performance non-cooling pump laser, combined with artistic package and best
b. optic performance, creating the best flexible and variable low-cost amplifier in the market. This module is suitable for multiple network application, especially the application that requires 40GB/S transmission speed.
c. SBM4100-GM01 gain block booster EDFA module adopts the standard version of single channel and narrow bandwidth. A standard 6-Pin (optional 14-PIN) electric connector allows the simple electric connection.
d. SBM4100-GM01 gain block booster EDFA module, main installed behind the optical transmitter to increase the output power of the transmitter and extend the signal transmission distance.
Applications
• Metropolitan and access networks
• CATV
• Single-channel or DWDM sub-systems
• Optical Add/Drop and Cross-Connects
• Transmitter and Receiver Amplification
• Power equalization and flexible pre-emphasis
Features
• Gain block
• Wide operating temperature range
• Output power 13~19dBm optional
• Small form factor package (40×70×12mm )
• Low power consumption
• Low cost
Dimensions
6-Pin FUNCTIONAL DIAGRAM
Electrical 6-Pin Assignments
Pin | Definition | Pin | Definition |
1 | Pump laser diode anode (+) | 2 | Pump laser diode cathode (-) |
3 | Pump laser PD anode (+) | 4 | Output monitor PD anode (+) |
5 | GND | 6 | Output monitor PD cathode (-) |
14-Pin FUNCTIONAL DIAGRAM
Electrical 14-Pin Assignments
Pin | Definition | Pin | Definition |
1 | Ground | 2 | Input monitor photodiode cathode(-) |
3 | Input monitor photodiode anode(+) | 4 | Output monitor photodiode cathode(-) |
5 | Output monitor photodiode anode(+) | 6 | NC |
7 | Laser diode anode(+) | 8 | Laser diode anode(+) |
9 | Laser diode monitor cathode(-) | 10 | Laser diode monitor anode(+) |
11 | Laser diode cathode(-) | 12 | NC |
13 | Ground | 14 | Laser diode cathode(-) |
Note: 14-Pin type: HIROSE DF11-14DP-2DSA
Specification
Performance | Min. | Typ. | Max. | ||||
Optic feature | Operating wavelength range | (nm) | 1528 | 1564 | |||
Input optical power (Pin) | (dBm) | -10 | +4 | ||||
Total Output power@ Pin=0dBm | SBM4113-GM01 |
(dBm) | 13 | 19 | |||
SBM4114-GM01 | 14 | ||||||
SBM4115-GM01 | 15 | ||||||
SBM4116-GM01 | 16 | ||||||
SBM4117-GM01 | 17 | ||||||
SBM4118-GM01 | 18 | ||||||
SBM4119-GM01 | 19 | ||||||
Noise figure | (dB) | 4.0 | 5.0 | ||||
Polarization dependent gain (PDG) | (dB) | 0.3 | |||||
Polarization mode dispersion (PMD) | (ps) | 0.3 | |||||
Polarization dependent loss(PDL) | (dB) | 0.3 | |||||
Pump power leakage | (dB) | -30 | |||||
Output & input isolation | (dB) | 30 | |||||
Return loss | UPC |
(dB) | 45 | ||||
APC | 55 | ||||||
Electrical feature | Pump laser threshold current (70℃) | (mA) | - | 50 | 70 | ||
Pump laser operating current (BOL) | (mA) | - | - | 600 | |||
Pump laser operating voltage | (V) | - | 1.75 | 2.2* | |||
Output monitor PD responsivity (70℃) | (μA/mW) | 1.0 | 25 | ||||
Output monitor PD reverse voltage | (V) | - | 5 | 20 | |||
Output monitor PD forward current | (mA) | - | - | 10 | |||
Dark current (-5V,25℃) | (nA) | - | - | 5 | |||
General feature | Fiber type | SMF-28, 900μm loose tube | |||||
Connector type | LC, SC, FC | ||||||
Connector polish | UPC, APC | ||||||
Operating temp. | (°C) | -5 | 70 | ||||
Store temp. | (°C) | -40 | +85 | ||||
Operating relative humidity | (%RH) | +5 | +95 | ||||
Size(W) × (L) × (H) | (mm) | 40× 70 × 12 | |||||
*70℃, 18dBm output.
Product sereis
Model | Max. Output power | Gain range | Mid-stage loss | Optical power monitoring mode | OSC optical monitoring mode |
IWA4718-M00-S00 | 18dBm | 16~28dB | 0~8.5dB |
Without |
Without |
IWA4720-M00-S00 | 20dBm | 14~33dB | 0~10.0dB | ||
IWA4723-M00-S00 | 23dBm | 24~41dB | 0~12.5dB |
Note: 1), Optical port monitoring mode options:
1, MO (With output monitoring optical port)
2, MI (With input monitoring optical port)
3, MIO (With input and output monitoring optical port)
2), OSC optical port mode of optical management channel:
1, OD (OSC/Drop)
2, OA (OSC/Add)
3, ODA (OSC/Drop & Add)
Ordering information
