10xx nm High Power Tap Coupler
Description
Idealphotonics 1x2 and 2x2 10xx nm high power tap couplers are used in fiber laser and amplifier systems to monitor both forward and backward power.
It can work under high power condition with exceptional low excess loss.
Feathure
Low Excess Loss
Low Insertion Loss and PDL
High Power Handling
High Stability and Reliability
Application
Fiber Lasers and Amplifiers
Fiber sensor
Specification
Parameter |
Spec |
Unit |
Note | |
Center Wavelength λc |
1030 ~ 1090 |
nm | Center wavelength must be specified, e.g. 1064nm,1080nm etc. | |
Bandwidth |
±10 |
nm | ||
Typical Excess Loss |
0.2 |
dB | ||
Insertion Loss* | 1:99 | 17~23/0.3 | dB |
Main signal port IL≤0.3dB, Tap port IL is not controlled |
0.1:99.9 | 27~33/0.3 | dB | ||
0.01:99.99 | 35~45/0.3 | dB | ||
Directivity |
≥50 |
dB | ||
Operating Temperature |
-40 ~ +85 | oC | ||
Fiber Type** | Corning HI1060, HI1060FLEX or others |
- |
1m typical length | |
Handling Power |
5~10 |
W |
Depends on package type | |
* Insertion loss above measured without connector.
** Customized fiber available,e.g. 10/125 SCF fiber.
Package Dimensions
Ø3 x L54mm
70x12x8mm
Handling Power: Ø3 x L54 mm: 5W;
70x12x8 mm: 10W,or more
Other package dimensions can be customized on request.
Ordering information
HPTC-1x2(or 2x2)-Center wavelength-Coupling ratio-Fiber-Pigtail-Package-Fiber length
Center wavelength: e.g. 1064nm, 1080nm etc. Coupling ratio: e.g. 1/99, 0.1/99.9, 0.01/99.99, etc. Fiber: e.g. HI1060, etc.
Pigtail: e.g. 900µm loose tube, etc. Package: e.g. Ø3 x L54 mm, 70x12x8 mm.
