Flyin Optronics' 1x2 Mechanical Optical Switch connects optical channels by redirecting an incoming optical signal into a selected output fiber. This is achieved using a patent pending opto-mechanical proprietary configuration and activated via an electrical control signal.
All Flyin Optronics' 1x2 Mechanical Optical Switch support all wavelength at 1260nm~1650nm, it offers ultra-high reliability, low insertion loss, fast switching speed as well as bi-directional performance. The optical switches are widely used for Optical Network, Protection, Transmitter and Receiver Protection,Network Test System and Instrumentations.
Features
l Unmatched Low Cost
l Low insertion Loss
l High Channel Isolation
l High Stability, High Reliability
l Epoxy-free on Optical Path
l Latching and Non-latching
Applications
l Optical Network
l Protection/Restoration
l Optical Singnal Routing
l Configurable Optical Add/Drop
l Transmitter and receiver protection
l Network Test System
Performance Specifications
Parameter | FY-1×2T | ||
Wavelength Range | nm | 850 | 1260~1650 |
Operating Wavelength | nm | 850 | 1310/1490/1550/1625/1650 |
Insertion Loss | dB | Typ:0.8 Max:1.2 | Typ:0.5 Max:0.8 |
Return Loss | dB | MM≥30 SM≥50 | |
Crosstalk | dB | MM≥35 SM≥55 | |
PDL | dB | ≤0.05 | |
WDL | dB | ≤0.25 | |
TDL | dB | ≤0.25 | |
Repeatability | dB | ≤±0.02 | |
Power Supply | V | 3.0 or 5.0 | |
Lifetime | Times | ≥107 | |
Switch Time | ms | ≤8 | |
Transmission Power | mW | ≤500 | |
Operating Temperature | ℃ | -20~+70 | |
Storage Temperature | ℃ | -40~+85 | |
Dimension | mm | (L)27.0×(W)12.6×(H)8.0(±0.2) | |
Specification may change without notice.
Above specification are for device without connector.
Pins
Type | Pin | Electric Drive | Status Sensor | ||||||
1×2 | channel | 1 | 5 | 6 | 10 | 2-3 | 3-4 | 7-8 | 8-9 |
Latching | P1-P2 | V+ | GND | -- | -- | Open | Close | Close | Open |
P1-P3 | -- | -- | GND | V+ | Close | Open | Open | Close | |
Non-latching | P1-P2 | V+ | -- | -- | GND | Open | Close | Close | Open |
P1-P3 | -- | -- | -- | -- | Close | Open | Open | Close | |
Optical Route
Specifications | Voltage | Current | Resistance |
5V latching | 4.5~5.5 | 36~44mA | 125Ω |
5V non-latching | 4.5~5.5 | 26~32mA | 175Ω |
3V latching | 2.7~3.3 | 54~66mA | 50Ω |
3V non-latching | 2.7~3.3 | 39~47mA | 70Ω |
Ordering Information
X | XX | X | X | X | XX | X | XX |
Mode | Wavelength | Voltage Type | Control Model | Fiber Type | Fiber Diameter | Fiber Length | Connector |
S=SM M=MM | 85=850nm 13=1310nm 14=1490nm 15=1550nm 62=1625nm 65=1650nm 13/15=1310/1550nm X=Others | 3=3V 5=5V | L=Latching N=Non- Latching | 5=50/125 6=62.5/125 9=9/125 X=Others | 25=250um 90=900um 20=2.0mm 30=3.0mm X=Others | 1=1m 2=1.5m X=Others | 0=None 1=FC/PC 2=FC/APC 3=SC/PC 4=SC/APC 5=ST/PC 6=ST/APC 7=LC/PC 8=LC/APC X=Others |
