Plz feel free to contact:frank at cqbluejay.com
Specifications
Maximum radio range: 2KM(outdoor)
Maximum 100 remote unit without repeater
Probe accept digital sensor and PT100
MRS-D remote medical temperature sensor with probe inside
Features
1. Low cost 433MHZ temperature monitor device, easy to build monitor network via multi-point monitoring
2. Maximum radio range: 2KM(outdoor)
3. Maximum 100 remote unit without repeater
4. 3500mAh battery provide 3 million times data upload
5. Indication and control accuracy 0.5C, high measurement.
6. Accuracy + -1%FS (Depends on the sensor).
7. Built-in digital filter reduce interfere, remote sensing unit with 64 communication channels, support FHSS technology to prevent signal interference and substitution
8. Support temperature/humidity sensor, or integrate sensor
9. Output and alarm format can be set by user.
10. Software can read and analyze the monitor data.
Specification
Interface parameters
Wired port
RS485 industrial serial interface, for send the received data (Ethernet option)
Wireless port
MICO RACE wireless interface, For receiving the data of the wireless remote sensing unit
Remote sensing unit management
Maximum 100 unit, depending on the data upload frequency and wireless setting
Wireless parameter
Operating frequency
Standard 434MHz
240~930MHz option
Channel
64
Spread-spectrum mode
Frequency hopping or fixed frequency (software configuration)
Wireless rate
2.4~256 kbps (software configuration)
Communication distance
(outdoor, antenna height 1.5 m)
400M (7dbm,5mw)
1300M (13dbm,20mw)
2000M (16dbm,40mw)
Communication protocol
MICO RACE protocol, support routing, network
Mechanical parameters
Dimension
82mmX60mmX27mm
Shell material
Aluminum (shielding)
Surface treatment
Oxidation (corrosion resistant)
