Shorten cycle of heating furnace, simplify the warming process and extend the service life of stove body.
Scatter fast with no caking,coalesced filament and residual.
Reduce heat stress, remove explosion and fracture, eliminate excess water vapor.
Strengthen bonding force, decrease springback of pouring.
The fibers are 30 times than that of other plastics.
The initial heating cycle is key for the lifetime of castable.
There are two contradictory requirements for furnace heating:
1.Warm slow and gradually in order to reduce the excessive water or vapor, or expand and craze;
2.Slow warming wastes time and energy and postpone the time that pad-molding uses at designed temperature.
Application:
Refractory coating, castable, gunning, plastic, ramming, unburned brick, foam mud, etc. high-strength and quick-drying monolithic as well.
Usage:
1. Please put appropriate cement or micropowder into the mixer, and the fiber (1-2kg/t) as well
2. Mix them. Add lots of refractory to the mixer if the fiber is well-distributed.
3. Please control the fiber quantity and mixing time as the matter of fact.
Chemical and physical property:
Type | DSL-160-3 | |
Item | Unit | Guaranteed Value |
Length | mm | 3-5 |
Tolerance of L | mm | ± 0.3 |
Diameter | μm | 20-40 |
Specific Gravity | g/cm3 | 0.91 |
Shrinking Temperature after Soften | ℃ | 120 ± 10 |
Melting Point | ℃ | 160 ± 5 |
Packing:
Woven bag with film (25kg)
