Hot Air BGA Rework Station With Hakko Heater , 1270W Solder Stations Feature
1. Using microcomputer processor PID programmable temperature control technology Preheating station is to use a glaze layer having a high thermal effect , good thermal shock resistance of the ceramic as the substrate , high-quality nickel branded alloy wire once sintering. It has a high thermal effect , overall good , good thermal stability , uniform heating , high dielectric strength , clean , easy to install and so on features .
2. Air Gun heater use ceramic heater , heating elements firmly wrapped around the model ceramic , rapid and uniform heating. Use the upgraded version fan , the airflow larger than the ordinary fan , spiral out of the wind, long life.
3. Soldering iron part using Hakko heater , heating up rapidly , temperature stability , long service life ; antistatic design to prevent electrostatic damage to delicate SMD components.
4. The machine has a self-test function , full intelligent over-temperature , short-circuit , open circuit , overload and fault display and protection functions.
5. 853AAA preheating station using the user-friendly design , the cover affixed with a high-temperature , insulated protection pads to prevent scalding operation. The stent uses magnetic induction technology , card board bracket to prevent protective pads suck hood above , can rotate 360 degrees , flexible card board , it is suitable for the circuit boards of different shapes and sizes.
6. 853AAA temperature correction function to adapt to the environmental impact , or replace the heating elements, soldering iron tips etc. spare parts caused by temperature deviation , can use this function calibration temperature. The correction temperature range is -50 °C ~ +50 °C.
7. 853AAA has Celsius / Fahrenheit temperature display function meet different market needs to design the temperature display mode, you can choose under customary interest.
Hot Air BGA Rework Station With Hakko Heater , 1270W Solder Stations General Usage
1). Suitable for de-soldering and soldering BGA , SOIC , CHIP , QFP , PLCC package SMD IC ,
Particularly suitable for de-soldering BGA module , computer motherboard north and south bridge , all kinds of mobile phone motherboard SMT IC and LED lights.
2). Shrinking , Paint drying , adhesive removal , thawing , warming , Plastic welding etc.
Hot Air BGA Rework Station With Hakko Heater , 1270W Solder Stations Data
Voltage AC220C±5%
Max power consumption 1270W
Preheating station parts
Temperature Range 50~ 300 °c or 50~400 °c / 152~572 °F or 152~752 °F
Temperature Stability ±2 °c
Display Type LED
Area 120*120mm
Hot Air Reworks parts
Airflow type brushless fan spiral out wind
Air Flow ≤130L / min
Temperature Range 100 °c -480 °c / 212°F ~896 °F
Temperature Stability 100 °c -480 °c / 212 °F ~896 °F
Display Type LED
Handle cable length ≥100cm
Soldering Iron parts
Temperature Range 200 °c -480 °c / 392°F~896 °F
Soldering iron heater Hakko heater
Solder iron holder blue Ferro-alloy iron holder
Soldering iron handle Blue iron handle
Temperature Stability ±1°c
Tip of ground voltage <2mV
Tip ground impedance <2 ohm
Display Type LED
Handle cable length ≥100cm
QTY 4PCS / Outer carton
Inner box size 37*35*18cm
Outer carton box size 73*40*39cm
Goods weight 5.54kg / pcs
Hot Air BGA Rework Station With Hakko Heater , 1270W Solder Stations Picture
These are 220V units you may need a transformer to use the machine in your country. we also do accept special orders for 110V / 230V / 240V units
Our Warranty
* Credit Safeguard
GuangZhou YiHua Electronic Equipments Co,. Ltd wa
