Silver Ion Sterilizer of Water Sterilization Equipment

Sterilization Equipment Ags-15 Silver Ion Sterilizer For drink safety water
Silver Ionization Capacity: 0~25m3/h
Electrolytic silver ion way
Easy change electrode
0.04-0.1ppm silver ion concentration
This silver ions sterilizer only can kill off bacteria, germs, algae etc. In drinking water
1. Overview
(1) Disinfection of water
Before consuming drinking water it has to be disinfected. Furthermore the growth of bacteria in storage tanks and pipes has to be prevented. Chlorination is a well known way of disinfection which has a long lasting preservation time. This method has more and more been replaced on modern ships by other ways of disinfection, which do not incorporate the hazardous handling of chlorine.
(2) Disinfection with silver ions
The use of silver ions is a well proven and accepted method of cleaning and inhibiting the growth of bacteria in drinking water.
Silver ions do not add taste, smell or change the water in any other means. As long as the concentration of silver ions is present in the water, there will be no bacteria in the water distribution system or in the storage tank.
(3) Concentration of silver ions
For fresh water disinfection it is recommended to add 0.1ppm of silver ions. The minimumtime required for silver to take effect is 4 hours after passing through the unit. This should ensure a maximum of 0.08ppm in the system. 1
2. Main Features of Silver Ion Sterilizer
(a)Very compact design. Control unit can be mounted together or separated from electrode chamber.
(b)User-friendly interface.
(c)Fully automatic silver ion discharge, proportional to measured flow or to predefined flow.
(d) Fail-safe. A remotely controlled valve prevents water from entering the distribution system in case Silver Ion Sterilizer is not functioning normally or if the electrode is used up.
(e) Two control inputs which can be individually configured for either a flow meter or a run/stop signal.
(f)Sterilizing water that is bunkered in the harbour can be done in two ways:
(f1) Manually: After/while bunkering water in the harbour: Simply enter the batch volume (m3) and the appropriate amount of silver ions will be discharged.
(f2)Automatically: Install a flow meter on the bunker line and connect to control input 2. Silver ions will be automatically discharged in proportion to the bunkered volume. Bunker flow can be higher than SilSter's maximum capacity;
Silver Ion Sterilizer will continue until the appropriate amount of silver ions has been discharged.
(g) Very easy to change electrode.
(h) Alarm output. User is warned if SilSter 15 Water Sterilizer is not functioning normally or if the electrode is running low.
3. Technical specifications
Model: Ags-15 or SIL-15 Silver Ion Sterilizer
Sterilization Capacity: 0 - 10 m3/h water @ 0.1ppm silver ion concentration (max 0.5A / max 48V / max 20W).
0 - 25 m3/h water @ 0.04ppm silver ion concentration.
Number of silver plates: Twin silver plate 100% purity
Voltage: 220VAC, 50/60Hz
Output current: 0~200mA
Flow meter: Pulse generating type PLC connection
Protection: IP54
Alarm output: Potential free, NO/NC
Working Pressure: Max. 0.1Mpa
Connection: DN25, for both in/outlet
Overall dimensional: 450*210*460mm