ASNU08(NFS8) One Way Clutches Roller Type (8x35x13mm) One Way Bearings Stieber Freewheel Cam Clutch Made in China | ||||||||||||||
| A . One Way Clutches Roller Type Parameters | ||||||||||||||
| Brand- | TMP | |||||||||||||
| Model number- | ASNU08(NFS8) | |||||||||||||
| Inner ring(mm)- | 8 | |||||||||||||
| Outer ring(mm)- | 35 | |||||||||||||
| Width(mm)- | 13 | |||||||||||||
| Weight(Kg)- | 0.07 | |||||||||||||
| Drag torque(Nm)- | 12 | |||||||||||||
| Materials- | GCR15 | |||||||||||||
| Series- | ASNU(NFS) | |||||||||||||
| Lubrication type- | Grease/oil | |||||||||||||
| Clutch type- | Roller | |||||||||||||
| Precision- | P0 | |||||||||||||
| Structure- | ASNU(NFS) is a roller type freewheel nonbearing supported. | |||||||||||||
| B . ASNU08 One Way Clutches Roller Type Specification Sheet | ||||||||||||||
| Model Number | d | Drag torque | Overrunning Speeds (r/min) | D | D5 | L | b | t | s | e | f | Weight | Drag torque TR | |
| [mm] | TKN1 [Nm] | ni | na | [mm] | [mm] | [mm] | [mm] | [mm] | [mm] | [mm] | [mm] | [kg] | [Ncm] | |
| ASNU08 | 8 | 12 | 3300 | 5000 | 35 | 28 | 13 | 4 | 1.4 | 2.4 | 0.6 | 0.3 | 0.07 | 1.6 |
| C . ASNU(NFS) Series One Way Clutches Roller Type Details | ||||||||||||||
| Product Features | One Way Clutches Roller Type mainly used as Overrunning and Indexing clutches; Overrunning clutches:The freewheel disengages automatically when the driven member rotates faster than the driving member. Indexing clutch:The freewheel allows the conversion of reciprocating motion into a discontinuous rotational movement. | |||||||||||||
| Series Introduction | ASNU(NFS) is a roller type freewheel nonbearing supported. Bearings are required to support axial and radial loads. Lubrication and sealing must also be provided by the installation. Nominal outer diameter is the same as a series 63...Ball bearing. A typical arrangement is to install this type alongside a bearing within the same location tolerances, as shown on the following page. The inner race is keyed to the shaft. The outer race has positive n6 tolerance, to give a press fit in a H7 housing. Additional side notches in the outer race provide for positive torque transmission. If the housing is to K6 tolerance, use of the notches is not necessary, but the housing must be strong enough to not expand after assembly. This design can accept an axial misalignment of inner and uter race of ± S/2. | |||||||||||||
| Series Model No. | ASNU8 ASNU12 ASNU15 ASNU17 ASNU20 ASNU25 ASNU30 ASNU35 ASNU40 ASNU45 ASNU50 ASNU60 ASNU70 ASNU80 ASNU90 ASNU100 ASNU120 ASNU150 ASNU200 NFS8 NFS12 NFS15 NFS17 NFS20 NFS25 NFS30 NFS35 NFS40 NFS45 NFS50 NFS60 NFS70 NFS80 NFS90 NFS100 NFS120 NFS150 NFS200 | |||||||||||||
| Applications | Reducers , Flender Gearbox ,SEW Gearbox; Overrunning clutch:for multiple-machine drives or to separate the inertia of masses of a driven machine from the driving machine after it has been switched off. Indexing clutch:which turns a shaft step by step, thus achieving indexed material feed or a variable speed. Backstop clutch:to prevent a machine shaft turning backwards. In this case the overrunning clutch acts as a brake. | |||||||||||||
| http://www.aliexpress.com/store/1500617 | |||||||||||||
| http://www.aliexpress.com/store/1462552 | |||||||||||||
| http://www.tradebearings.com/so21986/ | |||||||||||||
| http://tmpmachine.sell.everychina.com/ | |||||||||||||
| http://so21986.tradeprince.com/ |
TMP Bearrings,Crossed roller bearing,Thin section bearing,Turntable bearing,Ceramic Ball Bearings,Bearing,Slewing bearing,Robotic bearing,YRT Rotary Table Bearing,Angular Contact Ball Bearing,Thin section ball bearing ,One Way Clutches,One Way Bearings,Drawn Cup Roller Clutches,Overrunning clutches,Indexing clutches,Backstop clutches
Company Information
TPM machinery Parts is a professional manufacturer of high precision bearings and other equipment,The main products are Thin Section Bearings, Crossed roller bearings, Rotary Table Bearings, Tapered Roller Bearings, Angular Contact Ball Bearings, Slewing Bearings, Sports equipment accessories etc,Our products are used for Robotics, CNC Machine Tools, You can find all you need in our store, all the bearings and parts here is made in China and can replace with imported parts .
