| BB15 One Way Clutches Sprag Type (15x35x11mm) Overrunning clutches Japanese bearing supported Cam Clutch | ||||||||||||
| A . One Way Clutches Sprag Type Parameters | ||||||||||||
| Brand- | TMP | |||||||||||
| Model number- | BB15 | |||||||||||
| Inner ring(mm)- | 15 | |||||||||||
| Outer ring(mm)- | 35 | |||||||||||
| Width(mm)- | 11 | |||||||||||
| Weight(Kg)- | 0.04 | |||||||||||
| Torque Capacity(Nm)- | 29 | |||||||||||
| Materials- | GCR15 | |||||||||||
| Series- | BB | |||||||||||
| Lubrication type- | Grease/oil | |||||||||||
| Clutch type- | Sprag/Cam Clutch | |||||||||||
| Precision- | P0 | |||||||||||
| Structure- | BB series Cam Clutch | |||||||||||
| B . BB15 One Way Clutches Sprag Type Specification Sheet | ||||||||||||
| Model | Torque Capacity | Max. Overrunning Speed (r/min) | Drag Torque (Nm) | Diameter(mm) | Weight (kg) | Bearing Loads(N) | ||||||
| Nm | Inner Race | Outer Race | A | B | C | D | r | Cr | Cor | |||
| BB15 | 29 | 3600 | 2000 | 0.01 | 11 | 35 | 15 | 32.6 | 0.6 | 0.04 | 5950 | 3230 |
| C . BB Series One Way Clutches Sprag Type Details | ||||||||||||
Product Features | One Way Clutches Sprag Type mainly used as Backstop clutches(Most suitable as backstops, and mostly the contact-free versions); operation. The freewheel prevents reverse rotation if the drive is disconnected. | |||||||||||
Series Introduction | General information of Installation and usage for BB series Cam Clutch 1. BB series Cam Clutch is designed for press fit installation. 2. BB-1K-K and BB-2GD 1K-K series have a keyway on the inner race. Keyways, except size 25 are manufactured to DIN 6885. 3, BB40-1K-K and BB40-2GD 1K-K are manufactured to DIN 6885. 1. 3. BB-2K-K series has a keyway on both the inner and outer race. "-K" means keys shipped together with Cam Clutch. 4. Correct interference dimensions at the shaft and the housing must be maintained to obtain maximum bearing and clutch performance. 5. Refer to the table on next page for tolerance of the shaft and housing for each series. 6. BB, BB-1K and BB-2K Clutches, bearing supported and delivered with grease have dust seal protection against particles of 0.25mm and over, whereas BB-2GD and BB-2GD-1K clutches, 5mm wider than standard BB series, have special lip seals for effective protection against any dust. 7. The arro-w on the inner race shows the direction of inner race engaging. 8. To install the clutch, use a press tool of the appropriate diameter to apply even pressure over the entire face of the inner and outer race. 9. Do not hammer or apply other shock to the clutch. 10. Make sure the housing has enough strength to withstand the pressure required for the press fitting installation of the Clutch. 11. Operating temperature range: –30°C to +100°C (Consult us for the temperature that exceeds this range). | |||||||||||
Series Model No. |
BB15 BB17 BB20 BB25 BB30 BB35 BB40 BB15-2GD BB17-2GD BB20-2GD BB25-2GD BB30-2GD BB35-2GD BB40-2GD | |||||||||||
| Applications | Reducers , Flender Gearbox ,SEW Gearbox; Overrunning clutch: for multiple-machine drives or to separate the inertia of masses of a driven machine from the driving machine after it has been switched off. Indexing clutch: which turns a shaft step by step, thus achieving indexed material feed or a variable speed. Backstop clutch: to prevent a machine shaft turning backwards. In this case the overrunning clutch acts as a brake. | |||||||||||
| http://www.aliexpress.com/store/1500617 | |||||||||||||||||
| http://www.aliexpress.com/store/1462552 | |||||||||||||||||
| http://www.tradebearings.com/so21986/ | |||||||||||||||||
| http://tmpmachine.sell.everychina.com/ | |||||||||||||||||
| http://so21986.tradeprince.com/ |
TMP Bearrings,Crossed roller bearing,Thin section bearing,Turntable bearing,Ceramic Ball Bearings,Bearing,Slewing bearing,Robotic bearing,YRT Rotary Table Bearing,Angular Contact Ball Bearing,Thin section ball bearing ,One Way Clutches,One Way Bearings,Drawn Cup Roller Clutches,Overrunning clutches,Indexing clutches,Backstop clutches
Company Information
TPM machinery Parts is a professional manufacturer of high precision bearings and other equipment,The main products are Thin Section Bearings, Crossed roller bearings, Rotary Table Bearings, Tapered Roller Bearings, Angular Contact Ball Bearings, Slewing Bearings, Sports equipment accessories etc,Our products are used for Robotics, CNC Machine Tools, You can find all you need in our store, all the bearings and parts here is made in China and can replace with imported parts .
