Mega48pa Atmel Capacitive Touch Panel , 10.1 " Windows 8 Touch Screen
Quick Detail:
- Cover Glass+ITO Glass+FPC
- Surface Hardness: 7H
- Size: 10.1 inch
- IC: Atmel mXT1664T + mega48pa (COB)
- Interface: USB
- Operating System: Windows
TP Specification:
|
Model No. |
SCT-GA0-004681M |
| Structure | GG |
| Surface Hardness | 7H |
| Size | 10.1 Inch |
| Active Area | 217.96 x 136.6 mm |
| Outline Dimension | 253.96 x 168.6 mm |
|
Interface |
USB |
| Connection | COB |
| IC Model | Atmel mXT1664T + mega48pa |
| Operating System | Windows |
|
Transparent |
≥87% |
|
Operating temperature |
-2070, ≤90%RH |
| Storage temperature | -3080, ≤90%RH |
LCD Specification:
|
Size |
10.1 inch(Diagonal) |
| Resolution | 1280 x 3(RGB) x 800 |
| Driver Element | a-Si TFT active matrix |
| Dot Pitch | 0.0565(W) x 0.1695(H) mm |
| Active Area | 216.96(W) x 135.60(H) mm |
|
Interface |
LVDS |
| Display Mode | Normally White, Transmissive |
| Color Arrangement | RGB-stripe |
|
Technology Type |
a-Si |
|
Pixel Pitch (mm) |
0.192 (H) x 0.192 (V) |
|
Pixel Configuration |
R.G.B. Vertical Stripe |
| Surface Treatment | Glare |
|
Backlight Power Consumption |
TBD (Typ.) |
|
Panel Power Consumption |
TBD (Typ.) |
|
Viewing Direction |
12 O'clock |
| Weight | 207g |
Assembly Precautions:
- Do not exert extra force to touch panel.
- Since touch panel is transparent and clear,make sure to wear fingerstall or glove before touching.Be careful of your hands and other parts from injury at handling by glass corners.
- When installing and assembling, do not lift tail with heavy force to avoid tail peeling off touch panel.
- When handling,make sure to hold the touch panel borders not center parts to avoid dirt to touch panel. Do not lift touch panel by tail to avoid tail loosen.
- Do not stick or mount other parts on the tail, such as additional film or metal plate. As it will exert extra force to tail tip and cause tail loosen.
- Please don't pull FPC with force from side to side, because the FPC tension will make FPC burst.
- If there is air groove on touch panel, when design product structure, make sure no liquid and powder near the air groove.
- In order to avoid heavy stress to touch panel surface, make sure to keep 0.2mm-0.5mm assembling gap between touch panel and case.
About Us
