9 inch GPS Capacitive Touch Screen multitouch panel with 10 multi points touch
Quick Detail:
- Cover PET + ITO Glass + FPC
- Surface Hardness: 3H
- Interface: I2C
- Work Voltage: 2.8V-3.3 V
- Light Transmittance: ≥87
- Application: Car Navigation
Specification:
Model No. |
SCT-P90-105307D |
Size |
9 inch |
Active Area |
198 x 112.08mm |
Structure |
Cover PET + Sensor Glass |
Sensor Glass |
1.1mm |
Cover PET |
0.8mm |
Total Thickness |
2.1±0.1mm |
FPC |
Pitch=0.5mm |
Surface Hardness |
3H |
Connection |
COF |
IC Model |
GT9271 |
Multi Touch |
10 Points |
Interface |
I2C |
Transmittance |
≥87% |
Working Voltage |
2.8-3.3V |
Operating System |
Android / Linux |
Operating temperature |
-2070, ≤90%RH |
Storage temperature |
-3080, ≤90%RH |
Assembly Precautions:
- Do not exert extra force to touch panel.
- Since touch panel is transparent and clear,make sure to wear fingerstall or glove before touching.Be careful of your hands and other parts from injury at handling by glass corners.
- When handling,make sure to hold the touch panel borders not center parts to avoid dirt to touch panel. Do not lift touch panel by tail to avoid tail loosen.
- When installing and assembling, do not lift tail with heavy force to avoid tail peeling off touch panel.
- Do not stick or mount other parts on the tail, such as additional film or metal plate. As it will exert extra force to tail tip and cause tail loosen.
- Please don't pull FPC with force from side to side, because the FPC tension will make FPC burst.
- If there is air groove on touch panel, when design product structure, make sure no liquid and powder near the air groove.
- In order to avoid heavy stress to touch panel surface, make sure to keep 0.2mm-0.5mm assembling gap between touch panel and case.
About Us
Main Structure:
GG structure
GG structure uses cover glass plus sensor glass solution, harder than PG structure, high transmittance and good effect for anti-scratch.
PG structure
PG structure uses one PET film plus sensor glass solution. Mature process technology greatly reduces the failure rate an