Pressed Stainless Steel Sectional Water Tank
Technical Specification
1. Design
1.1 Material
The sectional panel tank shall consist of 4' x 4' or 1 meter x 1 meter panel manufactured from 1.5mm to 4.0mm thickness
according to requirement.
1.2 Flanges
The sectional panels shall be pressed to double flanges at the angles of 45 degree and 90 degree to the face of the plate
on four sides.
1.3 Reinforcement Method
All tanks are internally braced with angle stays to endure the rigidity of the tank when filled with the water.
The Top panel is supported by top panel support, which shall be made of stainless steel grade 304 or 316 material
according to requirement.
2. Accessories
2.1 Bolt. nut & washers stainless steel 304 material.
2.2 Sealing material Non-toxic P.V.C foam tape shall be used in between the joints.
2.3 Covers The tank cover shall be constructed from 1.2mm to 3.0mm of thickness stainless steel 304 material
according to the requirement.
2.4 Ladders and Level Indicator
Internal & external ladder shall be made of stainless steel grade 304 material.
Material | Size | Panel Shape | Thickness | Remarks |
Stainless Steel 304
| 1x1m, 1x0.5m, 0.5m x 0.5m | Ball shape | 1-5mm | Thickness Tolerance: ±0.2mm |
Hot-dipped Galvanized Steel | 4ftx4ft, 1x1m, 1x0.5m, 0.5x0.5m | " X " shape Ball shape | 1-5mm | |
GRP/FRP/SMC
| 1x1m, 1x0.5m, 0.5x0.5m | Ball shape | 4-24mm |
