Titanium stub end
Material: Gr1 (3.7025), Gr2 (3.7035), Gr7 (3.7235), Gr12 (3.7105)
UNS N02200, UNS N02201
Specification: 1/2-36"
SCH 10S, SCH 40S, SCH 80S, SCH STD
Surface: Concentric or spiral serrated face
125-250 AARH
Surface: lap surface concentric or serrated spiral finish having a resultant surface finish from 3.2 mircometers to 6.3 micrometers (125 microin. to 250 microin.) average roughness shall be furnished. The cutting tool employed should have an approximate 1.5 mm (0.06 in.) or larger radius, and there should be from 1.8 grooves/ mm through 2.2 grooves /mm (45 grooves/in. through 55 grooves/in.)
STM B363 Titanium fittings
ASTM B363 Titanium lap-joint stub end
Surface: lap surface concentric or serrated spiral finish having a resultant surface finish from 3.2 mircometers to 6.3 micrometers (125 microin. to 250 microin.) average roughness shall be furnished. The cutting tool employed should have an approximate 1.5 mm (0.06 in.) or larger radius, and there should be from 1.8 grooves/ mm through 2.2 grooves /mm (45 grooves/in. through 55 grooves/in.)
| Name | Titanium stub end | |||||||||
| Material | Gr1, Gr2, Gr7, Gr12 | |||||||||
| Specification | 1/2"-48" Schedule 5s to Schedule 80 | |||||||||
| Standard | ASTM B363 MSS SP-43 | |||||||||
| Surface Processing | quartz-shot, sand-blasting, polishing | |||||||||
| Month capacity | 10 MT | |||||||||
| EN 10204-3.1 Certificate (Partial Reference) | ||||||||||
| Requirement | Ti | N | C | H | Fe | O | Residual Element | |||
| Remainder | ≤ | ≤ | ≤ | ≤ | ≤ | Each | Total | |||
| Required | 0.03 | 0.1 | 0.015 | 0.3 | 0.25 | 0.1 | 0.4 | |||
| Result | ST-01 | 0.02 | 0.02 | 0.001 | 0.044 | 0.06 | ≤0.1 | ≤0.4 | ||
| Tensile Test | ||||||||||
| Requirement MIN | Lot No. | Tensile Strength | Yield Strength 0.2% | Elongation | ||||||
| [MPa] | [MPa] | [%] | ||||||||
| 345 MIN. | 275-450. | 20 MIN. | ||||||||
| Result | ST-01 | 460 | 372 | 34 | ||||||
| Package instructions | ||||||||||
| 1. IPPC standard Wooden case | ||||||||||
| 2. Wrap pipe, fittings, flange with plastic bag | ||||||||||
| 3. Put sponge cushion at the bottom of the wooden case | ||||||||||
| 4. Put goods in the case and cushion the surrounding to assure the goods unmoveable in the case | ||||||||||
| 5. Nail the case, stick the tags, marks or required logos on the case. | ||||||||||
| 6. Special package upon request |
