Titanium Slip-on flange
PN 10, PN 16, PN 25, PN 40
Class 150LB, Class 300LB
Standard: EN 1092, ANSI B16.5
Material: ASTM B381 F1, F2, F7, F12
NPS: 1/2-24"
DN: 15-1200
| Material | Titanium Gr1 (3.7025), Gr2 (3.7035), Gr7 (3.7235), Gr12 (3.7105), Nickel UNS N02200 (2.4066), UNS N02201 (2.4068) | |||||||||
| Size | 1/2"-48" Schedule 5s to Schedule 80 | |||||||||
| Standard | ASME B16.5, EN 1092, JIS 2201, AWWA C207, ASME B16.48 | |||||||||
| Type | PL, BL, WN, LP, SO, spectacle etc | |||||||||
| Mating rate: | Class 150-1200LBS, PN 1.0-4.0 Mpa | |||||||||
| Month capacity | 10000 pieces | |||||||||
| Tests | UT, DPI, PT | |||||||||
| Face | RF, FF, FMF, RJ, Groove etc | |||||||||
| Cerfificate | EN 10204-3.1 | |||||||||
| EN 10204-3.1 Certificate (Partial Reference) | ||||||||||
| Requirement | Ti | N | C | H | Fe | O | Residual Element | |||
| Remainder | ≤ | ≤ | ≤ | ≤ | ≤ | Each | Total | |||
| Required | 0.03 | 0.1 | 0.015 | 0.3 | 0.25 | 0.1 | 0.4 | |||
| Result | ST-01 | 0.02 | 0.02 | 0.001 | 0.044 | 0.06 | ≤0.1 | ≤0.4 | ||
| Tensile Test | ||||||||||
| Requirement MIN | Lot No. | Tensile Strength | Yield Strength 0.2% | Elongation | ||||||
| [MPa] | [MPa] | [%] | ||||||||
| 345 MIN. | 275-450. | 20 MIN. | ||||||||
| Result | ST-01 | 460 | 372 | 34 | ||||||
Our Advantage:
ISO 9001:2008 approval, Chinese manufacturing license of special equipment, National high-tech enterprise, Two patent inventions products in China
Application:
Exhaust pipe, Titanium exhaust reboiler, power plant steam condenser, sea water condenser, heat exchanger, turbine, off-shore project, marine, pulp, sea-water desalination, environment-protecting, petrochemical, vessel, material, metallurgy etc
