Multifunction LED Dive Lamp 6°- 68° Zoomable 60 Meters Underwater
PRODUCT SPECIFICATIONS
| Model | D10U zoomable Diving Light/underwater photographing light |
| Bulb | CREE XM-L U2 LED (Max 680 Lumens) |
| Color temperature | 6500k |
| Three output levels | High> Low>Strobe |
| Runtime | High: 70 min, Low: 320 min, Strobe: 150 min |
| Reflector | No Reflector |
| Lens | Aspheric lens |
| Body material | Durable aircraft-grade aluminum |
| Angle of light beam | 6°- 68° zoomable |
| Surface treatment | Premium Type III hard-anodizing |
| Color | Black |
| Battery | 18650 Li- ion battery *1 |
| Circuit Protection | With battery over-discharging protection, polarity reversing protection |
| Operation voltage | 2.8V to 4.5V |
| Waterproof | 60 meters underwater |
| Dimensions | 129-144mm (length)*23(dia. of body)*45mm (dia. of head) |
| Impact resistance | 1.5M |
| Weight | 190 grams (without battery); 240 grams (with battery) |
| Underwater Weight | 200 grams (with battery) |
BATTERY INSTALLATION
- Remove the tail by turning counter-clockwise.
- Remove used batteries and replace with fresh batteries as shown by the polarity stickers.
- Mount the tail by turning clockwise. DO NOT ACTIVATE IT YET.
BATTERY CHARGING
- Plug the charger in the wall power socket, the indicator light is green in the free-load status.
- Put the battery in the slot of the charger.
- The indicator light is red if the battery is not fully charged; it will turn green after fully charged.
- Take out the fully charged battery and use them in the diving light.
ON/OFF
Turn the tail clockwise until the light activates. DO NOT OVERTIGHTEN.
To turn the light off, back off the tail counter-clockwise until the light goes off.
Continue to back off for approximately one full turn to eliminate the possibility of the light activating accidentally in storage. For underwater use, backing off too much will allow water to enter past the o-ring.
MODES CHANGING
Successive switch ON-OFF within two seconds to cycle through high, low, strobe.
Zoom
Twist the head of the light to zoom the beam.
SCUBA DIVING APPLICATION
Check closely for cuts, scratches, or an otherwise damaged o-ring or mating lens surface as this can cause the light to flood under pressure. Remove any salt deposits, sand, dirt, or other foreign matter from the o-ring sealing surfaces.
KEEP THE THREADS, O-RING GROOVE LUBRICATED WITH SILICONE GREASE.
CAUTION
If the light is not to be used for some time, remove the batteries to prevent possible leakage or corrosion. Please remove the batteries during transportation to prevent it from misoperation.
WARRANTY RETURN POLICY
Please contact your local distributor or retailer for information on how to handle your warranty items.
REPLACEMENT PARTS
CAT# DESCRIPTION
D10U8 O-ring
D10U9 Lens
