Cree XM L U2 Canister Scuba Snorkeling Light Type III Anodizing 4000 Lumens
QUICK DETAIL:
Xiware offers a primary light for every occasion,whether you’re a recreational diver or a technology cave diver,we supply the cutting – edge LED based portable illumination system for your diving goals.
PRODUCT SPECIFICATIONS:
| Model | DH40 Canister Diving Light |
| Bulb | CREE XM-L U2 LED*4 (Max 4000 Lumens) |
| Modes | High> Low>Strobe> off |
| Runtime | High: 5.0h, Low: 15.0h, Strobe: 8.0h |
| Color temperature | 6500K |
| Reflector | Glossy Aluminum reflector |
| Lens | 8mm Polycarbonate Board |
| Body material | Durable aircraft-grade aluminum |
| Angle of light beam | 8° hot spot, 110° periphery |
| Surface treatment | Premium Type III hard-anodizing |
| Color | Black |
| Battery | Rechargeable Li- ion battery pack (18650 battery*8) |
| Battery Indicator | 100%-50%: Green; 50%-30%: Yellow; 30%-10%: Red; Below 10%: Red Flashing; Below 5%: switch off |
| Charging | Can be charged directly on the light, with battery over-discharging protection, polarity reversing protection |
| Fully charging time | 8-10h |
| With gas release valves | |
| Operation voltage | 12V to 18V |
| Waterproof | 200 meters underwater |
| Dimensions | 244.5mm (canister length)* 78.2mm (dia. Of canister) * 64.5mm (dia. Of light head) |
| Weight | 2420 grams (with battery pack) |
| Underwater Weight | 1150 grams (with battery pack) |
| Impact resistance | 1.5M |
FEATURE ADVANTAGE:
- Polymer sealing glands and fittings
- Strain-relief fittings on the cords
- Larger diameter,hands-free Goodman handle,easy to use with dry gloves
- Stainless Steel locking latches
- With gas release valves
COMPETITIVE ADVANTAGE:
- 2 Years warranty on Canister
- Depth rated to 200meters or 656 feet deep.
- 800-1000 charge/discharge cycles
- Battery indicator:100%-50%: Green; 50%-30%: Yellow; 30%-10%: Red; Below 10%: Red Flashing; Below 5%: switch off
SCUBA DIVING APPLICATION
Check closely for cuts, scratches, or an otherwise damaged O-ring or mating lens surface as this can cause the light to flood under pressure. Remove any salt deposits, sand, dirt, or other foreign matter from the O-ring sealing surfaces.
KEEP THE THREADS, O-RING GROOVE LUBRICATED WITH SILICONE GREASE.
